Masters Dissertations : Engineering: Recent submissions

  • Performance Evaluation of TinyCoAP Protocol in WSNs Application from Latency, Power Consumption and Memory Occupation Perspective 
    Ali, Hala SirElkatim; Supervisor - Salaheldin Mohamed Ibrahim Edam (Sudan University of Science and Technology, 2015-07-10)
    The Constrained Application Protocol (CoAP) is used with TinyOS which called TinyCoAP to give the same features of HTTP while keeping a simple design and low overhead. TinyOS already have another implementation of CoAP ...
  • Voice- activated System by Using Microcontroller with Noise Reduction 
    Ahamed, Siddig Hussein Mohammed; Supervisor - Ala-Eldin Abd allah Awouda (Sudan University of Science and Technology, 2015-06-10)
    This project proposes a design of voice activated with noise reduction system using microcontroller. The system is aimed to makethe voice oriented command is more cleared. A voice recognitionmodule has been added to the ...
  • Performance Analysis of Triple play Services for IP Over WiMaX and DSL Networks 
    Ahmed, Asia Mahgoub Taha; Supervisor - Ibrahim Khider (Sudan University of Science and Technology, 2015-06-10)
    In telecommunications, Triple Play service is a marketing term for provisioning of two bandwidth-intensive services, high-speed Internet access and television, and a less bandwidth-demanding (but more latency-sensitive) ...
  • Hydraulic Design of Nyala Water Supply Project from Bagara Basin 
    MATOK, MOHAMED AHMED DODO; Supervisor - MOHY-ELDEIN AHMED ABDEL-GADIR (Sudan University of Science and Technology, 2014-12-10)
    The project is named Nyala Water Project, the design capacity of this project is 40,000 cubic meters of water per day , it was designed by the Public Water Corporation of the Ministry of Irrigation and Water Resources ...
  • Benefits of building Information Modeling for Construction in Sudan 
    Ali, Halima Bashir M.; Supervisor - Awad Saad Hassan (Sudan University of Science and Technology, 2015-03-10)
    Building Information Modeling “BIM” is has the potential to create a single model that offers visualization, clash detection, construction phases, and materials and testing together . Building Information Modeling (BIM) ...
  • Implementation of RSA and ECC Security Protocol for Mobile AD HOC Networks 
    Ibrahim, Mohammed Adam Aldod; Supervisor - Ibrahim Khider Eltahir (Sudan University of Science and Technology, 2015-04-10)
    Mobile ad hoc networks (MANETs) can be defined as a collection of large number of mobile nodes that form temporary network without aid of any existing network infrastructure. there are numbers of attacks that affect ...
  • Development of protocol for Inspecting Imported Medical device 
    Khiri, Sahar Mohammed Mustafa; Supervisor - Elias Sidieg Mohammed (Sudan University of Science and Technology, 2015-05-10)
    Medical devices play an important role in human being health. Consequently, it is important that there should be unified inspection method for imported medical devices and unify a team of work consisting of all regulatory ...
  • Analysis and Investigation of Interference Rejection Combining Technique inAdvancedLong Term Evolution (LTE) 
    Mustafa, Adel Mohammed ElhaJ; Supervisor - Ibrahim KhiederAltahir (Sudan University of Science and Technology, 2015-05-10)
    One of the main problems which is happened in long term evolution Advanced system (LTE-A) or 4G, is interference In this thesis Interference Rejection Combining (IRC) technique have been applying to reduce interference, ...
  • 2D Radar antenna orientation and control 
    aAbdalla, Tayseer Mustafa Hummaid; Supervisor - AbdalrasoolGabarAlzubiadi (Sudan University of Science and Technology, 2015-05-10)
    In the RADAR system is first step and much more important and itmuch more effect in the other step in RADAR system works. The RADAR is used in different applications and systems, almost of these applications ...
  • Applicability of Earned Value Technique in the Construction Industry In Sudan 
    Elkhangi, Mohamed Abdelrahman Abdalla; Supervisor - Salaheldin Abdelaziz Ajban (Sudan University of Science and Technology, 2015-06-10)
    The construction industry is one of oldest industries in the world and Sudan especially construction industry transform physical resources into useful structure. There are many parties involved in the construction industry ...
  • ضوابط و اجراءات السلامة عند تغيير غرض المبانى 
    احمد, داليا احمد الريح; مشرف - عصام ابكر اسحق (جامعة السودان للعلوم والتكنولوجيا, 2015-06-10)
    تهدف هذه الدراسه الى معرفه ضوابط واجراءات السلامه عند تحويل غرض المبنى ومن اهم اهداف الدراسه تحقيق بيئة آمنة ومحصنة وخاليه من المخاطر , والمحافظة على صحة وأرواح رواد المؤسسة والعاملين فيها,المحافظة على الممتلكات الخاصة ...
  • أسباب المنازعات في العقود الھندسیة بالسودان 
    اسحق, هبة ابراهيم ادم; مشرف - صلاح الدين عبدالعزيز عجمان (جامعة السودان للعلوم والتكنولوجيا, 2015-05-10)
    تعتبر العقود الهندسية هي خطة تنفيذ المشروع بواسطة طرفيها لما تحتويه من شموليةتقدم الغرض الذي من اجله برم العقد الا ان هنالك بعض الخلافات التي يعمل العقد على حلها بشكل جزي مما يضطر الطرفان اللجوء الي القضاء ولجان فصل المنازعات ...
  • INVESTIGATION OF REPEATED FAILURE OF MOVABLE JOINTS IN HEAVY VEHICLES 
    Mohammed, Hashim Ahmed Fadelelseed; Supervisor - Hassan Osman Ali (Sudan University of Science and Technology, 2015-08-10)
    Combat armored vehicles contribute significantly in military forces, they performed general or specified mission and support all war fighting function.WMZ551B is armored personnel carrier. The movable joint in a steering ...
  • CONTROL PHASED ARRAY ANTENNA FOR RAIN FADING MITIGATION OF 21-GHZ BAND BROADCASTING SATELLITE 
    Ibrahim, Fatima Khider; Supervisor - Rashid A.Saeed (Sudan University of Science and Technology, 2015-05-10)
    Ka-band offers relatively larger bandwidths but requires higher satellite EIRPs to compensate for higher link fading. At C-band the effects are minor and at Ku-band, while they are noticeable, can be accommodated. But at ...
  • Network Models for Voice and Data in Air Traffic Control (ATC) 
    Mohamed, Yasir Eltayeb Sidahmed; Supervisor - Ibrahim Khedir Eltahir (Sudan University of Science and Technology, 2015-06-10)
    As air traffic increases, routes get more and more diverse and light and ultra light aircraft are becoming more and more popular, the classic system is beginning to show its weaknesses. The two main issues regarding ...
  • Improving the Efficiency of Combustion in Kenana Boilers by Analyzing Flue Gases 
    Elniama, Zuhair Mohammed Omer; Supervisor - El Khawad ali Elfaki (Sudan University of Science and Technology, 2015-04-10)
    The efficiency of a heating appliance or application is dependent on the efficiency of the combustion process. Complete combustion with the appropriate flame is necessary to release the maximum amount of energy available. ...
  • مؤشرات إنتاجية العمالة في صناعة التشييد في السودان 
    جبارة, مهند صديق محمد أحمد; مشرف - صلاح الدين عبدالعزيز عجبان (جامعة السودان للعلوم والتكنولوجيا, 2015-04-10)
    نسبة لاهمية قياس انتاجية العمالة في صناعة التشيد في السودان وما يشكله من هاجس لدي اغلبية العاملين بالمجال حيث تشكل العمالة وما يتعلق بها من تساؤلات واشكاليات عنصرا هاماومحوريا في الصناعة فقد هدفت هذة الدراسة لجمع البيانات ...
  • Impact on Quality and Productivity of Using Technological Advances in Road Construction Industry 
    Alhassan, Mayada Mohammed; Supervisor - Galal Abdalla Ali (Sudan University of Science and Technology, 2015-03-10)
    The construction sector has developed significantly both at the level of procedures and implementation techniques, or on the level of utilization of modern technology in construction industry. These modern methods and ...
  • A Study of the Effects of Joint Type on the Performance of Stadia Dome Roofs 
    Osman, Salma Mohammed Khair; Supervisor - Abdel Rahman Elzubeir Mohamed (Sudan University of Science and Technology, 2015-02-10)
    In this study, the linear analysis of stadia dome roofs using the finite element method was carried out considering the joints to be pinned, semi-rigid, or rigid. The straight space frame finite element was selected to ...
  • Development and Application of a Computer Program for Structural Design of Rigid Highway Pavements 
    Mohammed, Muram Mohammed Ali; Supervisor - Galal A. Ali Mohamed (Sudan University of Science and Technology, 2015-02-10)
    In this study the thickness of rigid pavement was determined using manual computations by applying two design approaches namely American Association of State Highway and Transportation Officials Method (AASHTO) and ...

Search SUST


Browse

My Account