Masters Dissertations : Engineering: Recent submissions

  • Factors affecting safety performance on construction sites in Sudan 
    Salih, Osman Omer Osman (Sudan University of Science & Technology, 2016-12-01)
    The construction industry is considered one of the most hazardous industries, not only in developing countries but also throughout the world due to its unique nature. This makes more attention to construction safety ...
  • Finite Element Analysis of Driven Piles inExpansive Soil (CaseStudyKhartoum Area) 
    Mostafa, Siham Moubarak Elbasheer (Sudan University of Science & Technology, 2016-11-01)
    Piles offer an innovative alternative for foundations in expansive soils.......
  • A Comparison of Depth Interpolation by Using GIS & Neural Networks 
    Abdelrahim, Khalid Mohamed Abdalla (Sudan University of Science and Technology, 2017-05-10)
    Depth measurement is Considered as a first goal in hydrographic survey, it depends on different techniques and instruments, it’s most costly procedures. However; some mathematical models are used for condensing depths with ...
  • Polypropylene Fiber Reinforced Concrete as a Construction Material in Sudan 
    Ahmad, Amal Ahmed Satti (Sudan University of Science and Technology, 2017-05-10)
    Sudan one of the developing country in the world. In future high strength high performance concrete required for construction work .Concrete being the most important and widely used material is called upon to possess ...
  • Performance Evaluation of Routing Protocols in Ad Hoc Networks 
    Algadi, Islam Ahmed (Sudan University of Science and Technology, 2017-05-10)
    Mobile ad hoc Networks (MANETs) are a type of wireless ad hoc network which is a self-arranging network of mobile nodes connected by wireless links. The mobile nodes are free to move randomly. There are some challenges ...
  • Radiation Protection Assessment 
    Mohamed, Manal Abd Alla Ali (Sudan University of Science and Technology, 2016-11-10)
    Ionizing radiation can cause harm and a systematic approach should be applied to ensure that there is a balance between being able to utilize the benefits from medical uses of ionizing radiation and minimizing the risk of ...
  • DESIGN AND IMPLEMENTATION OF EQUIPMENT CONTROL PROGRAM 
    Elsheikh, Mai Abdallah (Sudan University of Science & Technology, 2017-05-01)
    Tracing of the lifecycle of the medical devices affects in the health care facility, the medical devices system is very important to control the processes in the hospital, whichrelated with the medical devices and provide ...
  • A Fully - Automated Center-Pivot Irrigation System Using a Microcontroller and a Solar Energy System 
    khalf Alla, Hajir Osman Saeed (Sudan University of Science and Technology, 2017-04-10)
    The center-pivot irrigation system has become one of the most commonly used due to its efficiency worldwide but it suffers from the shortcoming of the pumps needing frequent maintenance and monitoring; which are prone to ...
  • مكافحة الحرائق فى المبانى والمراكز التجارية 
    الحاج, بد الدين أحمد حميده (جامعة السودان للعلوم والتكنولوجيا, 2017-04-10)
    هدفت هذه الدراسة إلى مدى جودة مكافحة الحرائق في المباني والمراكز التجارية من الحرائق. وتم عمل دراسة لمبنى دار الهاتف القومي وسوداتل، بالإضافة إلى مركز عفراء التجاري، كنماذج للعنوان الدراسة بولاية الخرطوم. فمكافحة ...
  • Effect of intake and exhaust valves timing on gasoline engine performance and emissions 
    Salih, Mohammed Abass Ali Mohammed (Sudan University of Science and Technology, 2017-06-10)
    an internal combustion engine, valve timing is an important design parameter which affects many engine performance parameters. In this study , engine specifications were applied to the DIESEL-RK program to test engine ...
  • Radio Link budget Calculation for Cube Satellite Communication 
    Fageery, Eman Ali Abdalmotalab (Sudan University of Science and Technology, 2016-12-10)
    The Communication link of CubeSat satellite suffers from Poor power of received signal, therefore, the link of CubeSat satellite is Susceptible to noise and interference and the signal may be lost because the CubeSat ...
  • Design and Simulation of an Automatic Filling Line for Different Sizes using Programmable Logic Controllers 
    Abdelrahman, Alhussien Abdelgadir Abdelrahim (Sudan University of Science and Technology, 2017-05-10)
    Filling is a task, which carried out by a machine that packages liquid products such as cold drinks or water. Traditional methods of bottle filling involved placing bottles into a conveyor and filling only one bottle at ...
  • Design and Implementation of Microcontroller Based Accurate Drilling Machine 
    Abu Hijil, Muaaz Mohammed Elhassan Atit Alaa (Sudan University of Science and Technology, 2017-05-10)
    The aim of this thesis is to design an accurate drilling machine by use Arduino microcontroller and geared stepper motors for mechanical movement and use laser techniques for drilling. This design connected to a personal ...
  • Performance Evaluation of QoS for Real Time Applications Using Multiprotocol Label Switching 
    Ahmed, Duaa Ahmed Mohamed (Sudan University of Science and Technology, 2017-04-10)
    Internet Protocol (IP) network has different problems during packets transmit. Delay and packet drop are famous challenges of developers. The researchers are having many tries to solve those problems. Multi-Protocol Label ...
  • Performance Evaluation of VoIP QoS in WiMAX Networks 
    ABDALLA, MARWA ELHAG MOHAMMED (Sudan University of Science and Technology, 2017-04-10)
    Worldwide Interoperability for Microwave Access WiMAX is a new emerging access technology and one of 4G broadband access wireless technologies with large coverage area, low cost of deployment and high speed data rates. In ...
  • Tracking and monitoring system for railway transportation in Khartoum city 
    Humaida, Amna Zaki Abdulrhman (Sudan University of Science and Technology, 2017-06-10)
    Transportation is a large and important part of the economy of a country; train is one of the main transportation systems of Sudan. Therefore, we should have a good and strong monitoring system that can locate a train at ...
  • Assessment of Site Engineers Safety Culture in Construction Industry in Khartoum State 
    Ahmed, Mohanned Yahia Ali (Sudan University of Science and Technology, 2017-05-10)
    In many countries construction industry plays an important role on economic and social development. In economic and developing countries Safety considered as an essential factor. Because safety rules are not committed ...
  • Primary Health Service Distribution in Urban Areas Using GIS 
    Abdel Gadir, Mohamed Abdel Gadir Rahama (Sudan University of Science and Technology, 2017-05-10)
    Dealt with the subject of the study through spatial distribution of the governmental health centers, for understanding its relationship with the numbers of population, health outcomes and access, in light of rapid urbanization ...
  • Performance Enhancement of Atbara – Portsudan Transmission Line 
    Ali, Mazen Khaled Shaikhaldeen Mohmed (Sudan University of Science and Technology, 2017-04-10)
    Due to the ever increasing demand for power, economic and environmental constraints that limit the expansion and restructuring transmission networks, the transmission lines are prone to be operated under heavily stress ...
  • Controlling of Sponge Coke Feeder Using Microcontroller 
    Hamed, Saddam Gasmallah Ahmed (Sudan University of Science and Technology, 2017-03-10)
    The boilers it is the main parts in Garri4 station, but the cost of fuel and extend the life of boilers parts it is the big problems facing the station, the main goals for this research it is control the sponge coke to ...

Share

Search SUST


Browse

My Account