Masters Dissertations : Engineering: Recent submissions

  • NB-IoT Narrowband Physical Uplink Shared Channel Performance Analysis for Low Power Cellular Communication 
    Dahab, Mona Bakri Hassan; Supervisor, Rashid A. Saeed (Sudan University of Science & Technology, 2020-08-20)
    Narrowband-IoT (NB-IoT) is a standards-based Low Power Wide Area Network (LPWAN) technology developed to connect a wide range of new Internet of Things (IoT) devices and services. NB-IoT bandwidth is limited to a single ...
  • تقييم استراتيجية صيانة المباني الخرسانية طيلة عمرها الافتراضي 
    محمد, عزه الفاتح عبدالله; مشرف, -صالح الهادى محمد احمد (جامعـــــــــة السودان للعلوم والتكنولوجيا, 2018-12-12)
    تعتبر الصيانة العنصر الثالث الأساسي بعد التصميم والتنفيذ بالنسبة لأي منشأ وبالأخص المنشآت الخرسانية، فالصيانة هي العنصر الهام للمحافظة على المبنى مع الزمن ولضمان بقائه سليما طيلة فترة عمره الافتراضي. ومن هنا كان الهدف ...
  • IMPLEMENTATION OF INTEGRATED SOLAR TRACKING SYSTEMS FOR CONCENTRATING PHOTOVOLTAIC PANELS 
    Elnour, Azmi Abdelmuniem Taha; Supervisor, - Abubker yousif Eltayeb Osman (Sudan University of Science & Technology, 2020-10-01)
    Due to the rotation of the earth in an orbit, direction of the Sun changes relatively. This research represents a setup, which is fabricated to minimize the angle of incidence between incoming light from Sun and a flat ...
  • A Design of Water Injection System for Gas Turbine by Numerical Analysis at Garri Power Plant 
    Mohammed, Abd Elazim Awad Allah Elebad; Supervisor, - Abdullah Mokhtar Mohammed (Sudan University of Science and Technology, 2019-09-10)
    The Thermal power plants play an important role in converting chemical energy to electrical and heat energy.Gas turbines are used for power electrical generation, operating airplanes and for several industrial applications.At ...
  • Adaptive Vehicle Suspension System Using Microcontroller and Electro-hydraulic actuator 
    Abdrhman, Ahmed Adam Mohamed; Supervisor, - Ebtihal H. G. Yousif (Sudan University of Science and Technology, 2019-11-10)
    The design of suspension system of today’s light vehicles is getting very crit ical, owing to unbalancing in sharp turns and irregular road pattern which affect the comfort of the passengers and safety. This project deals ...
  • A Microcontrooller-Based Weather Prediction System using the Sliding Window Algorithm 
    Abd-Elmajed, Alawia Salman; Supervisor, - Ala Eldeen Abd-Allah Awouda (Sudan University of Science and Technology, 2020-11-10)
    Weather forecasts are made by collecting as much data as possible about the current state of the atmosphere (particularly the temperature, humidity and wind) and using understanding of atmospheric processes to determine ...
  • Performance measurement of construction projects managed by ISO-certified contractors in Khartoum 
    Ahmed, Samah Gaffer Mohammed; Supervisor, - Salma Yahia Mohamed (Sudan University of Science and Technology, 2019-12-10)
    Today, getting a high quality project is a necessary requirement for both the owner and the executing companies, so all companies are seeking ISO certification, but on the other hand, increasing competition showed another ...
  • Detecting Pulmonary Tuberculosis in Chest X-Ray Images Using Convolutional Neural Network 
    Elsanosi, Aden Hassan Mergani; Supervisor, - Eltahir Mohammed Hussein (Sudan University of Science and Technology, 2021-02-10)
    The main objective of this study is to detect tuberculosis in chest x-ray images using a convolutional neural network. Tuberculosis (TB) is an infectious disease that generally attacks the lungs and causes death for millions ...
  • A Design of Pre Cooler for Gas Turbine at Garri (1&2) Power Station Using an Absorption Solar Refrigeration System 
    Ataitalla, Omer Hussein Mohammed; Supervisor, - Abdallah Mokhtar Mohammed Abdallah (Sudan University of Science and Technology, 2020-01-10)
    Several gas turbines are being widely used for power generation in several countries all over the world. Obviously, many of these countries have a wide range of climatic conditions, which impact the performance of gas ...
  • Productivity Improvement of Industrial Pipes Insulators 
    Obied, Hamam Abdelrahman Abdelmotalb; Supervisor, - Widatalla Alamin Abdalla (Sudan University of Science and Technology, 2020-12-10)
    The production processes of heat insulation are studied in order to improve the productivity of the production plant. It has been found that to increase the productivity an improvement in the manual processes to a more ...
  • THE STRUCTURAL PERFORMANCE OF VIERENDEEL FRAMES USING APPROXIMATE METHOD AND COMPUTER PROGRAMS 
    ABDELRAHEEM, MOMEN KHALIFA HASSAN; Supervisor, - ABUSAMRA AWAD ATTALEMANAN (Sudan University of Science and Technology, 2019-10-01)
    The Vierendeel girder definition is open-frame N-truss without diagonal members, with rigid joints between the top and bottom chords and the verticals are known also as open-frame girder, this research is conducted to study ...
  • Design of an Online Medical Devices Tender Logistics Management Information System (DOMDTLMIS) 
    Atwa, Mai Fatah Alalim Alhaj; Supervisor, - Fragoon Mohamed Ahamed (Sudan University of Science and Technology, 2019-02-10)
    Medical device is the key factor in making decision for patients; it is an important component in healthcare system, the development of new medical technologies can improve its ability of diagnoses and treatment. One of ...
  • العقود السائدة في صناعة التشييد بالسودان(السلبيات والإيجابيات) 
    مرسي, مدحت عبد المنعم محمد; مشرف, - صلاح الدين عبد العزيز عجبان (جامعة السودان للعلوم والتكنولوجيا, 2020-01-10)
    بشكل عام تعتبر العقود المستخدمة في صناعة التشييد أحد خطط تنفيذ أي مشروع ، لذلك لابد من إعدادها بكفاءة و بطريقة واضحة خالية من أي تعقيد بحيث تغطي كافة الجوانب الإدارية و الفنية و القانونية لتجنب أي مشاكل قد تنتهي بالمحاكم. تهدف ...
  • Motion Detection Algorithm Using Open Computer Vision 
    Osman, Mohammed Naeem Altyp; Supervisor, - Ibtihal Haidar Gismallah Yousif (Sudan University of Science and Technology, 2020-08-10)
    Monitoring areas such as security and surveillance are key areas in all aspects of our life in homes, roads, work areas, military zones, and other areas. Surveillance cameras have emerged to cover this field and have ...
  • Design and Development of an Automated Metal Inert Gas/ Metal Active Gas Welding Machine 
    AL-basheer, Mohammed Taha Al-tyeb; Supervisor, - Ebtihal Haider Gismalla Yousif (Sudan University of Science and Technology, 2019-11-10)
    Automated welding is the most preferred welding technique when it comes to construction of welding sheet metal of various thickness.The MAG welding machine has a relay switch to control ON/OFF operation of welding ...
  • Design and Implementation of an Automated Guided Vehicle Model in Production Line Control System Using Wi-Fi 
    Hamed, Alneel Hamed Abdalbagi; Supervisor, - Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2020-09-10)
    The Automated Guided Vehicle(AGV) or a programmable mobile vehicle is capable of transportation task fully automated at limited area such as using in industrial applications to transfer material and production around a ...
  • Design of Biometric-Based Approach For Monitoring of Online Examinations 
    Mohammed, Alaa Yahia Abdellatiff; Supervisor, - Hisham Ahmed Ali (Sudan University of Science and Technology, 2019-12-10)
    Online education platforms, including massive open online courses (MOOCs), have spread in recent years. However, the proctoring processes used in them haven’t accompanied this recent growth and importance of this kind of ...
  • Claims management in construction industry in Sudan 
    Rahama, Eman Abdulrahman Mohamed; Supervisor, -Salah eldin Abdelaziz Ajaban (Sudan University of Science and Technology, 2019-04-20)
    The construction industry is one of the largest industries in the world. In Sudan, it played and still a major role in the development process. The construction projects are characterized by a special and unique nature, ...
  • Design of a Launch Control Unit for FN-6 Weapon System 
    Alkair, Ahmed Abdallah Mohammed; Supervisor, -Ahmed Abdalla Mohamed Imam (Sudan University of Science and Technology, 2019-10-20)
    Lack of Launching Mechanism (LM) for each FN-6 missile where it’s found that one mechanism used repeatedly for the launch of three to ten missiles which reduces the efficiency of launch and causes frequent failures at ...
  • Optimization of Repeaters Spacing in Optical Fiber Communication 
    Abdelhady, Eltayeb Ali Dawelbait; Supervisor, -Salah Elfaki Elrofai Elfaki (Sudan University of Science and Technology, 2020-09-12)
    Optical fiber systems are an important infrastructure for broadband communications around the world. Broadband signal transmission with less delay is a major requirement in today's applications. Optical fibers provide ...

Share

Search SUST


Browse

My Account