College of Engineering: Recent submissions

  • hussin, Eltahir Mohammed Eltahir; Supervisor - Ali Hussein Mohammed Ali (Sudan University of Science and Technology, 2015-04-01)
    In tall buildings where the design is extremely affected by the lateral loads, wind and seismic, which could result excessive drifts and cause damage of nonstructural components. The challenging of designing tall building ...
  • Eltoom, Eman Abd elhameed Mohamed; Supervisor - Alnazier Osman Mohammed Hamza (Sudan University of Science and Technology, 2015-02-01)
    The importance of this study being discussed offer one of the most important electrical safety requirements (electrical grounding) in health care facilities, where the lack of grounding system in these important facilities ...
  • Ali, Mohammed Ali Issa; Supervisor - Yassin Mohammed Hamdan (Sudan University for science & technology, 2015-03-01)
    Lean Six Sigma method is recognized widely depend, basically on increasing the benefits without increase in cost and has been implemented predominately in manufacturing industry. This research draws attention to the ...
  • Butros, Diana Victor Gabra; Supervisor, Diana Victor Gabra Butros (Sudan University of Science and Technology, 2015-01-01)
    Construction is a risky industry compared to many other industries where it requires proper application of business practices. The Sudanese construction sector is characterized by many small and large projects and high ...
  • Mahjoub, Mohammed Salih; Supervisor, Sabir Mohmmed Salih (Sudan University of Science and Technology, 2015-02-01)
    In the present study, a new technology controlled Ethanol/Water mix injection method is applied to a direct injection (DI) diesel engine to show effect on engine performance and emissions under steady operation. Ethanol/water ...
  • حسن, مصعب جمال عبدالله; مشرف - صلاح الدين عبدالعزيز عجبان (جامعه السودان للعلوم والتكنولوجيا, 2015-03-01)
    تعرضت هذه الدراسة الى صناعة التشييد بالتركيز على مفهوم الإنتاجية، أهميتها، طرق قياسها، وكذلك أهم العوامل المؤثرة فيها . ولأهمية الإنتاجية البارزة في النواحي الاجتماعية والاقتصادية والثقافية ، حظيت باهتمام واضح في ...
  • Magzoub, Tayseer Awad Elkarim Elsiddig; Supervisor - Abuagla Babiker Mohammad (Sudan university of sciene & technology, 2014-10-01)
    In mobile ad hoc networks (MANETs), the provision of quality of service (QoS) guarantees is much more challenging , mainly due to node mobility and resource constraints. Most popular routing protocol in MANET is AODV. ...
  • Mohammed, Isam Abdel Nabi Osman; Supervisor, Abdelrasol Jabar Alzobidy (Sudan University of Science and Technology, 2014-03-08)
    Modern components for signal processing and high speed computers make it possible to achieve radar visibility reduction (Stealth Technology), that requires reduce the radar cross section (RCS) of an aircraft or the fighting's ...
  • Rida, Mutaz Zaher Mebrahto; Supervisor - Awad Saad Hassan (Sudan University of Science and Technology, 2015-03-01)
    Construction industry has complexity in its nature because it contains large number of parties as clients, contractors, consultants, stakeholders and others. Construction projects suffer from many problems and complex ...
  • Mohammed, Emad Basheer Hassan; Supervisor, Altahir Mohammed Husen (Sudan University of Science and Technology, 2015-03-01)
    Radiotherapy is concerned as important method for cancer tumor deices treatment ,using Cobalt -60 me chain . But respiration (Inhalation and Expiration) makes the abdomen or a chest expand and contract which cause the organ ...
  • Abdalwahid, Mohammed Bashir; Supervisor - Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2015-02-01)
    The increasing demand on mobile service providers to support high rate applications has prompted the development of 4G networks. To meet the rising demand, new enhanced technologies should be implemented. LTE Advanced is ...
  • Omar, Hala Omar Hussein; Supervisor - Elhadi Elnazier Ibrahim Saeed (Sudan University of Science and Technology, 2014-11-01)
    Traditionally, survey filed work is needed at the different stages of any engineering project. Namely; the preliminary study, design study, construction and for the prepartion of as build plans, in addition to the ...
  • Ahmed, Bokhari Abd Allah Mohammed; Supervisor - Ala-Addeen Awouda (Sudan University of Science and Technology, 2014-06-01)
    In this research, a non-linear model for the guide vane electro hydraulic actuator of turbine no.4 at Rosaries Hydro Power Station has been developed using MATLAB/SIMULINK integrated environment, and the performance of ...
  • Kanan, Bashier Ahmed Abdallah Ahmed; Supervisor - Elhadi Elnazier Ibrahim saeed (Sudan University of Science and Technology, 2014-11-01)
    The low cost navigator can be used to observe coordinates with a low accuracy and in a flexable way. This Research is directed towards the investigation of possibility of improvement of low cost Navigator observations ...
  • Abdalrahman, Abdallah Sharafeldien; Supervisor - Rashid Abdalhalim Saeed (Sudan University of Science and Technology, 2015-01-10)
    In recent years, Voice over IP (VoIP) has gained a lot of popularity and become an industry favorite over Public Switching Telephone Networks (PSTN) with regards to voice communication. The project consists of creating a ...
  • Hassan, Almogdad Salah Eldeen Mohammed; Supervisor - Abdelfttah Bellal (Sudan University of Science and Technology, 2015-02-01)
    In this work, control of elevator is accomplished using ATMEGA 16 (microcontroller), the control system is constructed to simulate as an actual lift in the real life which simulate by program via Bascom-AVR as programming ...
  • موسى, النور أبكر; مشرف - عصام أبكر إسحاق (جامعة السودان للعلوم والتكنولوجيا, 2014-11-01)
    إن عملية تقدير القيمة الاقتصادية للعنصر البشرى في أي وحدة إنتاجية يجب ان تنال اهتماما كبيراً وأن يكون هنالك أسلوب دقيق يجب إتباعه وأتساع دائرة تطبيقه في جميع مواقع صناعة التشييد للخروج بصورة دقيقة عن قيمة الثروة البشرية ...
  • ElShiekh, Fadwa Qasim; Supervisor - Galal Abdalla Ali (Sudan University of Science and Technology, 2014-12-10)
    Flexible pavements are widely used despite some doubts regarding their economics under different conditions. Lack of research, less construction technology know-how and cement high rates compared with asphalt in the past ...
  • عثمان, منال مصطفى محمد; مشرف - عصام ابكر اسحق (جامعة السودان للعلوم والتكنولوجيا, 2014-11-01)
    يعد قطاع التشييد من اكبر قطاعات الصناعة واهمها ويعتبر العاملين في هذا القطاع من اكثر العاملين عرضه للحوادث وإصابات العمل لذلك كان لابد من تركيز الجهود والدراسات التي تهدف الي تقليل احتمالية الخطر علي العاملين والممتلكات. تهدف ...
  • Ali, Tawasul Adil Hussein; Supervisor - Magdi Bakr (Sudan University of Science and Technology, 2015-01-10)
    This research focuses on quantify presence of malaria pigment (hemozoin) in blood stream by measuring the two properties of light interaction with hemozoin crystal: scatter angle and absorption of laser infrared when ...

Search SUST


Browse

My Account