College of Engineering: Recent submissions

  • Enhanced Synchronization Scheme Detection in Long Term EvolutionUsing Cell Search Procedure 
    Alaghbash, Wael Mohamed ElridaAbdulrahman; Supervisor -, Rashid A. ElhaleemSaeed (Sudan University of Science and Technology, 2016-02-10)
    There are synchronization signals used in the cell search and synchronization is the Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). Primary Synchronization Signal is used when user equipment ...
  • Turbine Temperature Control by Using Microcontroller 
    Yagoub, Abeer Abdalla Tageldeen; Supervisor,- AbdAlla Salih Ali (Sudan University of Science and Technology, 2015-12-10)
    A simulation study of the main steam (steam inlet to the turbine) temperature control system shows that this control strategy is effective. Using microcontroller which is programmed using the PROTUS. Simulation program ...
  • Control of Solar Tracking System 
    Bakeet, Nadar Abdelgader Ali; Supervisor -, Abdallah Saleh Ali (Sudan University of Science and Technology, 2016-01-10)
    The world population increases rapidly ,as a result power is needed. Power nowadays depends on traditional resources such as oil and coal, but these cause air pollution . So scientists begin to think of other resources of ...
  • Evaluation of the quality control system at Khartoum Central Foundry 
    Taha, Mohamed Ibnouf Mohamed; Supervisor -, Abdelfattah Bilal Abdelsalam (Sudan University of Science and Technology, 2015-12-10)
    Metal casting industries are actively involved to reduce the scrap rejection and rework during the manufacturing process of the components. To achieve this, the production concerns must follow the quality control procedures ...
  • تأثـير صناعة الاسمنت في السلامـة والصحة ألعامه 
    مــــــــــكـاوي, هيثــــــــــــم مكــــــــــــــاوي ســــــــيد; مشرف -, عصام أبكر إسحاق (جامعة السودان للعلوم والتكنولوجيا, 2016-02-10)
    تناول هذا البحث تأثير صناعه الاسمنت علي السلامة والصحة العامة بمصانع الاسمنت وتمت دراسة حاله (مصنع شركه اسمنت عطبره )، متمثله في بيئة العمل داخل المصنع وتأثيرها علي العاملين ، حيث تسبب البيئة الغير سليمة أمراض مهنيه وإصابات ...
  • A Study Of the Effect of Soil Movement on the Failure of Oil Tanks Foundation in Khartoum North Area 
    Tirti, Abdel-Wahid M .A.; Supervisor -, Sami Abdullah Osman (Sudan University of Science and Technology, 2015-08-10)
    Many Studies on oil storage tank foundation systems have shown that stability and soil movement are the two main factors which may lead to the rupture or even complete failure of oil tanks. Tank foundations are of variable ...
  • Closed Loop Control of Micro-electro Mechanical System 
    Ahmedy, Sara Ahmed Elmadani Ali; Supervisor,- Mosuab AbdallaHassan Zaroog (Sudan University of Science and Technology, 2015-08-10)
    Micro-electro-mechanical system (MEMS) actuators are used in a wide variety of commercial, military and industrial products. Electrostatic, thermal, electromagnetic and piezoelectric mechanisms, due to scalability and ...
  • DESIGNOF PRE COOLER FOR GAS TURBINE AT GARRI(1and2) POWER STATION BY USING VAPOUR COMPRESSION REFRIGERATION SYSTEM 
    HAMAD, JASSIM SALAH MOHAMMED; Supervisor -, Ali Mohammed Hamdan Adam (Sudan University of Science and Technology, 2016-02-10)
    Gas-turbine inlet air cooling has been considered for boosting the power output during hot seasons, the gas turbine being a constant volume-flow machine, the power of the gas turbine is directly proportional to the mass ...
  • GPS and GIS Integration for Georeferencing Cadastral Maps 
    Mohamed, Rania Faisal Abdalla; Supervisor -, Abdelrahim Alhag Abdelaziz (Sudan University of Science and Technology, 2016-02-10)
    Due to the fast growth of construction technologies and increasing demands on the efficient use of land, human living space are expanded from on the surface to above and under the surface. This has raised the importance ...
  • Performance Analysis of Three Phase Induction Motor Using Indirect Vector Control 
    Ahmed, Ibtihal Mosbah Ali; Supervisor,- Nagm Eldean Abdo Mustafa Hassanian (Sudan University of Science and Technology, 2016-01-10)
    This research presents a performance based comparative study fuzzy PI controller to control the speed of squirrel-cage induction motor (SCIM) by replacing the conventional proportional−integral (PI) controller. Performances ...
  • Application of Performance Approach to Provide Safety at Construction Projects 
    ALI, GASSAN ZUHAIR GASSIM; Supervisor -, ALSADIG ALHADI (Sudan University of Science and Technology, 2015-11-10)
    With rapid economic development and industrialization, the construction industry continues to rank among the most hazardous industries in the world. Therefore, construction safety is always significant concern for both ...
  • تقويم الأثر البيئي للغازات المنبعثة من السيارات في ولاية الخرطوم 
    أحمد, أحمد الامين محمد; مشرف -, أسامة محمد أحمد أدم (جامعة السودان للعلوم والتكنولوجيا, 2015-06-10)
    يتناول هذا البحث تقييم تلوث الهواء نتيجة للغازات المنبعثة من السيارات في ولاية الخرطوم. تم عمل دراسة ميدانية لقياس نسب الغازات المنبعثة من السيارات حيث تم اخذ عينات الهواء في ساعات الذروة في الفترة الصباحية و الفترة ...
  • Investigation Safety Performance In Construction Projects In Khartoum State 
    MAKI, AMAL HAMID; Supervisor -, ESAAM ABAKER ESHAG (Sudan University of Science and Technology, 2016-03-10)
    In both developed and developing countries, the construction industry is considered to be one of the most significant industries in terms of its impact on health and safety of the working population. Construction industry ...
  • Optimization of Abrasive Water Jet Cutting Process using Simulation 
    Mohamed, Abdalla Kamal Abdalla; Supervisor -, ELKhawad Ali Elfaki (Sudan University of Science and Technology, 2016-01-10)
    Abrasive Water Jet Machining – (AWJM) become one of popular and growing processes among Advanced Machining Processes. It has high material flexibility and advantages of geometric, and ability to cut materials that are hard ...
  • Improvement of Positional Accuracy of Agricultural Cadastre Using Global Positioning System and Geographic Information Systems 
    Alssim, Amira Gadain; Supervisor -, Abdel Rahim El Hag Abdel Aziz (Sudan University of Science and Technology, 2015-02-10)
    The importance arise from the cadaster is keeping the land ownership, is help to use the land by economic way and optimum use . The management of ownership depend on the accurate definition boundaries of ownership that ...
  • Effects of Sand Encroachment on Omdurman Locality Using Remote Sensing (1987 – 2013 
    Mohamed, Fatima Homeda Altoom; Supervisor -, Ahmed Mohamed Ibrahim (Sudan University of Science and Technology, 2016-01-10)
    Sand encroachment is one of the main problems threatening the agricultural production in some parts of Sudan, particularly in Omdurman locality. As the accumulations of sand dunes move, they bury villages, roads, oases, ...
  • THE PROCESS OF PLANNING& SCHEDULING IN CONSTRUCTION PROJECTS IN SUDAN Towards optimum applications 
    DOLEEB, SAHAR MOAWYA MOHAMMED; Supervisor -, Salah eldain Abdul-Aziz Ajban (Sudan University of Science and Technology, 2016-01-10)
    The primary objective of this research is scientific knowledge to the process of planning, scheduling and their application in construction projects in Sudan and see the obstacles impeding the implementation of this concept ...
  • Effect of Densification and Distribution of ground Control points On the Accuracy of Geometric Correction 
    alkhadir, Safa Khalid yousif; Supervisor -, Mohamed Alamin Ahmed Babiker (Sudan University of Science and Technology, 2016-01-10)
    Geometric distortions are inevitable in aerial photographs due to many factors, such as the curvature and rotation of the earth and the motion of the scanning system. Ground control points (GCPs) are important features ...
  • DESIGN OF NEURO-FUZZY CONTROLLER FOR FLOW SYSTEM 
    Mohammed, Hiam Awad Ahmed; Supervisor,- Awadalla Taifor Ali (Sudan University of Science and Technology, 2015-09-10)
    Water flow control is highly important in industrial applications such as boilers in nuclear power plants. This dissertation analyses the effectiveness of water flow using the Proportional Integral Derivative (PID), fuzzy ...
  • Optimize the Operational Parameters through Simulation to Increase the Efficiency of Combined Cycle Power Plants 
    Abdallah, Abdallah Mokhtar Mohammed; Supervisor -, Mohammed Eltayeb Mansour; Co-Supervised, Tawfig Ahmed Gamal Eldeen (Sudan University of Science and Technology, 2016-02-10)
    Electric power generation is one of the important factors for the development of peoples and can take an advantage of energy extraction technology of combined cycle in Sudan, which is highly effective in the States instead ...

Search SUST


Browse

My Account