College of Engineering: Recent submissions

  • Development of Edge Detection Technique Using Mathematics Methods for MRI Images 
    Jacknoon, Hiba Almamoon Ali (Sudan University of Science & Technology, 2017-03-01)
    Edge detection in medical image is an important task for object recognition of the human organs, and it is an essential pre-processing step in medical image segmentation and 3D reconstruction. Successful results of image ...
  • An Obstacle-Aware Global Position System /Global System for Mobile Enabled Electronic White Cane 
    Ali, EmadEldeen Elgaali AbdElgafar (Sudan University of Science & Technology, 2017-04-01)
    This research highlights new innovation and hope for the blind.It demonstrates that we can move on from the simple stick to a more reliable........
  • Use of SCADA system for remote monitoring of Khartoum state water corporation 
    Farah, Farah Bakri (Sudan University of Science & Technology, 2017-05-11)
    The Supervisory Control and Data Acquisition (SCADA) system monitors and controls many applications such as: (Water distribution network including water reticulation,pump stations, Public utilities, including electrical ...
  • Design of Adaptive Power System Stabilizer for Damping Power System Oscillations 
    Mohammed, Ahmed Mohammed Ishag (Sudan University of Science & Technology, 2017-03-01)
    Power systems are subjected to low frequency disturbances that might cause loss of synchronism and an eventual breakdown of entire system. The oscillations, which are typically in the frequency range of 0.2 to 1.0 Hz, might ...
  • Factors affecting safety performance on construction sites in Sudan 
    Salih, Osman Omer Osman (Sudan University of Science & Technology, 2016-12-01)
    The construction industry is considered one of the most hazardous industries, not only in developing countries but also throughout the world due to its unique nature. This makes more attention to construction safety ...
  • Finite Element Analysis of Driven Piles inExpansive Soil (CaseStudyKhartoum Area) 
    Mostafa, Siham Moubarak Elbasheer (Sudan University of Science & Technology, 2016-11-01)
    Piles offer an innovative alternative for foundations in expansive soils.......
  • A Comparison of Depth Interpolation by Using GIS & Neural Networks 
    Abdelrahim, Khalid Mohamed Abdalla (Sudan University of Science and Technology, 2017-05-10)
    Depth measurement is Considered as a first goal in hydrographic survey, it depends on different techniques and instruments, it’s most costly procedures. However; some mathematical models are used for condensing depths with ...
  • Polypropylene Fiber Reinforced Concrete as a Construction Material in Sudan 
    Ahmad, Amal Ahmed Satti (Sudan University of Science and Technology, 2017-05-10)
    Sudan one of the developing country in the world. In future high strength high performance concrete required for construction work .Concrete being the most important and widely used material is called upon to possess ...
  • Performance Evaluation of Routing Protocols in Ad Hoc Networks 
    Algadi, Islam Ahmed (Sudan University of Science and Technology, 2017-05-10)
    Mobile ad hoc Networks (MANETs) are a type of wireless ad hoc network which is a self-arranging network of mobile nodes connected by wireless links. The mobile nodes are free to move randomly. There are some challenges ...
  • Radiation Protection Assessment 
    Mohamed, Manal Abd Alla Ali (Sudan University of Science and Technology, 2016-11-10)
    Ionizing radiation can cause harm and a systematic approach should be applied to ensure that there is a balance between being able to utilize the benefits from medical uses of ionizing radiation and minimizing the risk of ...
  • DESIGN AND IMPLEMENTATION OF EQUIPMENT CONTROL PROGRAM 
    Elsheikh, Mai Abdallah (Sudan University of Science & Technology, 2017-05-01)
    Tracing of the lifecycle of the medical devices affects in the health care facility, the medical devices system is very important to control the processes in the hospital, whichrelated with the medical devices and provide ...
  • A Fully - Automated Center-Pivot Irrigation System Using a Microcontroller and a Solar Energy System 
    khalf Alla, Hajir Osman Saeed (Sudan University of Science and Technology, 2017-04-10)
    The center-pivot irrigation system has become one of the most commonly used due to its efficiency worldwide but it suffers from the shortcoming of the pumps needing frequent maintenance and monitoring; which are prone to ...
  • مكافحة الحرائق فى المبانى والمراكز التجارية 
    الحاج, بد الدين أحمد حميده (جامعة السودان للعلوم والتكنولوجيا, 2017-04-10)
    هدفت هذه الدراسة إلى مدى جودة مكافحة الحرائق في المباني والمراكز التجارية من الحرائق. وتم عمل دراسة لمبنى دار الهاتف القومي وسوداتل، بالإضافة إلى مركز عفراء التجاري، كنماذج للعنوان الدراسة بولاية الخرطوم. فمكافحة ...
  • Effect of intake and exhaust valves timing on gasoline engine performance and emissions 
    Salih, Mohammed Abass Ali Mohammed (Sudan University of Science and Technology, 2017-06-10)
    an internal combustion engine, valve timing is an important design parameter which affects many engine performance parameters. In this study , engine specifications were applied to the DIESEL-RK program to test engine ...
  • Radio Link budget Calculation for Cube Satellite Communication 
    Fageery, Eman Ali Abdalmotalab (Sudan University of Science and Technology, 2016-12-10)
    The Communication link of CubeSat satellite suffers from Poor power of received signal, therefore, the link of CubeSat satellite is Susceptible to noise and interference and the signal may be lost because the CubeSat ...
  • Design and Simulation of an Automatic Filling Line for Different Sizes using Programmable Logic Controllers 
    Abdelrahman, Alhussien Abdelgadir Abdelrahim (Sudan University of Science and Technology, 2017-05-10)
    Filling is a task, which carried out by a machine that packages liquid products such as cold drinks or water. Traditional methods of bottle filling involved placing bottles into a conveyor and filling only one bottle at ...
  • Design and Implementation of Microcontroller Based Accurate Drilling Machine 
    Abu Hijil, Muaaz Mohammed Elhassan Atit Alaa (Sudan University of Science and Technology, 2017-05-10)
    The aim of this thesis is to design an accurate drilling machine by use Arduino microcontroller and geared stepper motors for mechanical movement and use laser techniques for drilling. This design connected to a personal ...
  • Performance Evaluation of QoS for Real Time Applications Using Multiprotocol Label Switching 
    Ahmed, Duaa Ahmed Mohamed (Sudan University of Science and Technology, 2017-04-10)
    Internet Protocol (IP) network has different problems during packets transmit. Delay and packet drop are famous challenges of developers. The researchers are having many tries to solve those problems. Multi-Protocol Label ...
  • Performance Evaluation of VoIP QoS in WiMAX Networks 
    ABDALLA, MARWA ELHAG MOHAMMED (Sudan University of Science and Technology, 2017-04-10)
    Worldwide Interoperability for Microwave Access WiMAX is a new emerging access technology and one of 4G broadband access wireless technologies with large coverage area, low cost of deployment and high speed data rates. In ...
  • Tracking and monitoring system for railway transportation in Khartoum city 
    Humaida, Amna Zaki Abdulrhman (Sudan University of Science and Technology, 2017-06-10)
    Transportation is a large and important part of the economy of a country; train is one of the main transportation systems of Sudan. Therefore, we should have a good and strong monitoring system that can locate a train at ...

Share

Search SUST


Browse

My Account