College of Engineering: Recent submissions

  • Cracking & Deflection Of R.C Beam Models Including Additives 
    Abd ELmoumein, Sara Mohammed; Supervisor ,- Salih Elhadi Mohammed Ahmed (Sudan University of Science and Technology, 2011-03-01)
    The aim of this research is to study the effect of liquid additives on strength and behavior of R.C beam models . Cracking and deflection of these beam models has been studied . The liquid ...
  • Traffic Analysis of Mobile Communications for Sudani Service Provider 
    Abdelhadi, Ayman Abdalla; Supervisor ,- Khalid Hamid Bilal (Sudan University of Science and Technology, 2011-07-01)
    The performance of calls Traffic for any mobile service provide concentrated in the planning and development of the network which helps in the better performance. The aim of the project is to study, analyze and evaluate ...
  • DESIGN AND IMPLEMENTATION OF FIRING CONTROL SYSTEM USING MICROCONTROLLER 
    Mohamed, Khalid Said Abdalla; Supervisor ,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2011-12-01)
    The microcontroller has been successfully applied to a wide variety of practical problems such as the firing system. It has been shown that these controllers perform better than conventional controllers, especially when ...
  • SIMULATION AND IMPLEMENTATION OF 2-D TRACKING SYSTEM 
    Ibrahim, Mugeeb El-rahman Adam; Supervisor ,- Saad Daoud Sulaiman Al-Shamma (Sudan University of Science and Technology, 2011-11-01)
    The main objective of this thesis is to simulate and implement two dimensional )2-D) tracking systems using two DC motion control system. In this thesis an introduction has been given to the importance of 2-D tracking ...
  • Simulation Study of a Production System : Applied Study on Atbara Flour Mill Company 
    Eltayeb, Khalid Abd-Allah Ahmed; Supervisor ,- Ahmed Hassan Ahmed (Sudan University of Science and Technology, 2011-02-01)
    Decision making process is one of the significant factors those affect on the success and continuity of any business. Decision making under conditions of uncertainty represents the major problem in most of manufacturing ...
  • Analysis of Hose pump using CFD 
    Khalifa, MahanaYounis Hassan; Supervisor ,- Ali Mohamed Ali Elseory (Sudan University of Science and Technology, 2011-05-01)
    This thesis is an introduction to a new industrial model of positive displacement pump knows by the name ‘Hose Pump’. In this thesis, just a simulation of the shape of hose and watch the changes in speed and other barometers, ...
  • Extracted GPS-Derived Orthometric Heights to Form a Geoid Model in Sudan 
    Ahmed, Masaad Khalid; Supervisor, Khlafalla M. Badi (Sudan University of Science and Technology, 2011-12-01)
    The Global Positioning System (GPS) derived-heights have no relationship to the geopotential surface of the Earth’s gravity field because it is referenced to a geocentric ellipsoid. There is a need to refer heights to the ...
  • Automation By Using Programmable Logic Controller (PLC) Application on Metal Spinning Machine at YIC 
    Hamid, Ahmed Mohammed Ahmed; Supervisor ,- Elrasoul Gabar (Sudan University of Science and Technology, 2011-01-01)
    This research is to find an approach to how PLC automation control system can implemented, In designing anew PLC control automation replacing an old automation in metal spinning machine, which is composed of contactors ...
  • DESIGN OF AN AUTOMATIC PARKING SYSTEM USING RADIO FREQUENCY IDENTIFICATION (RFID) 
    Suliemen, Eihab Ahmed; Supervisor,- Awadalla Taiyfour Ali (Sudan University of Science and Technology, 2011-02-01)
    Over the last decade radio frequency identification (RFID) technology has grown at a formidable rate, thereby creating new and improved service at lower cost. This is resulted in an increase in number of users and different ...
  • WARE HOUSE AUTOMATION USING COMPUTER 
    Mohammed, Mustafa Mahmoud Eltayeb; Supervisor ,- Abd Elfttah Bilal (Sudan University of Science and Technology, 2011-02-01)
    This project indicates the steps of the design of handling system model used in control of warehouse, This automatic gripper moves in two axis (X, Y) to any programmed points. Beside, the project indicates the using of ...
  • Development and Application of Software Program for Pavements Design Methods 
    Mohammed, Mashair A.Elrahim; Supervisor ,- Galal A.Alla Ali (Sudan University of Science and Technology, 2011-02-01)
    AASHTO design procedures for pavements design (flexible, rigid and overlay) are reviewed, summarized and presented. Where necessary, tabulated data, charts and nomographs involved in the design are reproduced in equation ...
  • RISE OF VOLTAGE IN ATBARA-PORTSUDAN TRANSMISSION LINE : INVESTIGATION AND SOLUTION 
    Salim, Mohammed Musa Salih Idres; Supervisor ,- Khamis Arbeesh Saad Eldin (Sudan University of Science and Technology, 2011-02-01)
    Transmission Lines voltage are usually controlled by controlling reactive power flow. In order to control the reactive power the generating or absorbing reactive power are used. There are many type of compensation method ...
  • Transmission Line Design (Sag & Tension Calculation) in eastern Grid Project 
    Alamin, Bahaeldeen Ali Abdelrahman; Supervisor ,- Khamees Arbeesh Saad Eldeen (Sudan University of Science and Technology, 2011-02-01)
    Electric power transmission line design is highly affected by the climatically conditions. Sudan climate is partially tropical & Subtropical considering that maximum & minimum temperature differences are between 5oC to ...
  • ADESIGN METHOD FOR AGRICULTURAL ROADS 
    ABD ELRAHEAM, MOHAMED ABDALLA; ; Supervisor ,- ABBAS LAZ (Sudan University of Science and Technology, 2011-01-01)
    Roads are an important means of developing new areas and are increasingly required for convenient movement of people and their products to the markets. The main objective of this study is to design low cost agricultural ...
  • Programmable Logic Controllers Based Generator Protection System 
    Mohammed, Mohammed Elfatih Hassan Ahmed; Supervisor ,- Abd-Alla Salih Ali (Sudan University of Science and Technology, 2011-10-01)
    This research is about generator protection via Programmable Logic Controller. Afield device such as, sensors, current transformer, voltage transformer equipped to used as input signal supply to the PLC input modules, when ...
  • Peak to average power ratio reduction in MIMO-OFDM systems by using LDPC Codes 
    Ishag, Ezzeldin Abdel wahab; Supervisor ,- Mohammed Hussein Mohammed (Sudan University of Science and Technology, 2011-10-01)
    Multiple Input and Multiple Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) systems is the potential candidate for fourth generation (4G) mobile radio communication systems. The MIMO-OFDM systems ...
  • DIFFERENTIATE BETWEEN GRAY AND WHITE MATTER OF HUMAN BRAIN USING MRI 1.5 T 
    IDRIS, NIEMAT ADAM HAROON; Supervisor ,- MOHEMD EL-BASHIR MUSTAFA (Sudan University of Science and Technology, 2011-05-01)
    The Nuclear Magnetic Resonance Imaging (NMR) system is one of the most important modalities which used in diagnostic of the neuro-diseases. It can detect the small variation within the same type of tissue. The MRI also can ...
  • Technical Viability of Using Differential Gears Mechanism as a Variable Speed Drive 
    Mouzamel, Ahmed Elnour Mohammed; Supervisor ,- Abd Alfattah Bilal (Sudan University of Science and Technology, 2011-01-01)
    Variable speed drive technology has advanced dramatically in the last 10 years with the advent of new power devices and magnetic materials. This has given rise to substantial confusion by users and specifiers of variable ...
  • Implementation of Software Defined Radio (SDR) in Baseband 
    Fadlallah, Imadaldeen Abdalhafeez; Supervisor ,- Moutamn Mirghani Dafalla (Sudan University of Science and Technology, 2011-08-01)
    The ability to support multiple communication protocol is a fundamental feature of Software Defined Radio (SDR). This feature allows SDR to communicate with different radios without need for hardware change. The aim of ...
  • Implementation of OFDM Transceiver using Software Defined Radio Technology 
    Hussein, Ahmed Hussein Fayez; Supervisor ,- Moutman Mirghani Daffalla (Sudan University of Science and Technology, 2011-01-01)
    2UWKRJRQDO )UHTXHQF\ 'LYLVLRQ 0XOWLSOH[LQJ 2)'0 LV D WHFKQRORJ\ ZKLFK KDG SURYHG LWV ZLOOLQJQHVV WR SURYLGH WKH PRVW LQWHUHVWLQJ VHUYLFHV D XVHU PD\ GHVLUH LQ WKH KDUGHVW HQYLURQPHQWV OLNH ZLUHOHVV FKDQQHOV 7KH WKHVLV ...

Search SUST


Browse

My Account