College of Engineering: Recent submissions

  • Application of Programmable Logic Controller in Juice Production Lines 
    Gondy, Layla Bashir Khider; Supervisor - Abd Alrasol Jabar Alzubaidy (Sudan University of Science and Technology, 2011-03-01)
    The automation task for the manufacturing and industrial is playing as main role in new manufacturing language. The programmable logic controller evolution has helped the transferring to fully automation phase. By using ...
  • Improvement of Separation Efficiency in Crude Distillation Columns 
    Balla, Mohammed Eltigani Hamed; Supervisor, Ibrahim Hassan Mohammed Elamin (Sudan University of Science and Technology, 2011-07-01)
    This research was conducted on Nile Blend Crude Oil to improve the separation efficiency in crude distillation columns. El-Obeid atmospheric crude distillation unit efficiency was considered as study case of the research ...
  • Application of UK DCP 3.1 Software on Evaluation of Structural Capacity and Design of Existing Gravel Roads in Sudan Case Study ALDAMAZEEN -ALKOURMUK Road 
    Mohammed, Mohammed Alfadil Alradi; Supervisor - Sharaf Aldin Ibrahim Bannaga (Sudan University of Science and Technology, 2011-08-01)
    Dynamic Cone Penetrometer (DCP) is an instrument designed for the rapid in-situ measurement of the structural properties of existing pavements with unbound granular materials. Correlations to CBR, structural Capacity ...
  • Improvement of Crude oil Separation Process (Emulsions Breaking) for Neem Field Processing Facilities. 
    Fadlelmoula, Waleed A/Alla; Supervisor - Sabir Mohammed Salih (Sudan University of Science and Technology, 2011-05-01)
    Crude oil emulsions occur in many stages during oil production treatment. The main task in oil and gas production is to separate the gas, oil and water phases and to treat the individual phases in order to meet the product ...
  • التأمين العقار ي خلال فترة التشييد 
    محمد, سلمى مبارك عثمان; مشرف - صالح الهادي محمد أحمد (جامعة السودان للعلوم والتكنولوجيا, 2011-05-01)
    برزت أهمية هذا البحث من أن صناعة التشييد تعتبر أكبر قطاع صناعي له تأثير مباشر على اقتصاديات الدولة وعلى الرغم من هذا فإن التأمين في صناعة التشييد ضعيف ومعدلات نموه ضعيفة ولا تتعامل مع التأمين العديد من شركات التشييد الوطنية ...
  • Linear Finite Element Analysis of Stadia Dome Roofs 
    Alnigey, Omer Alsied Ali; Supervisor - Abdel Rahman Elzubeir Mohamed (Sudan University of Science and Technology, 2011-01-01)
  • Enhancement of VPN Quality of Service: Sudanese Banks Case Study 
    Mohammed, Sahar Rifaat Nagm Eldeen; Supervisor - Mamoun Mohamed Ahmed Suliman (Sudan University of Science and Technology, 2011-06-01)
    A Virtual Private Network (VPN) is a packet switching network technology that creates a secure network connection over a public network such as the Internet or a private network owned by a service provider. Large corporations, ...
  • Comparative Study of Flexible Pavement Design Methodologies 
    Abdalla, Selma Ahmed Mohamed; Supervisor - Galal Abdalla Ali (Sudan University of Science and Technology, 2011-01-01)
    Road deterioration, potholes, ruts, crack, and undulations, set evidence on the importance of investigating the causes of these defects and then offering a solution to eliminate them. Poor pavement thickness design is ...
  • Modeling of Signal Fading Phenomena in Code Division Multiple Access System in Sudan 
    Abdelaal, Abuelgasim Mohamed; Supervisor, Abdel Rasoul Jabar Alzubaidi (Sudan University of Science and Technology, 2011-03-01)
    Recent advances in wireless communication systems have increased the throughput over wireless channels and networks, at the same time; the reliability of wireless communication has been increased. A mobile signal propagation ...
  • Effect of Superpave Restricted Zone and Type of Filler on Hot Mix Asphalt Performance 
    Abass, Ibrahim Mohamed Ahmed; Supervisor - Galal A. Ali (Sudan University of Science and Technology, 2011-06-01)
    Load-induced pavement fatigue damage and rutting have become problematic on several road national pavements that are subjected to heavy static and dynamic traffic loads. The need for accurate and consistent laboratory ...
  • Application of New Technology to Substations Automation 
    Galaleldin, Fakhereldin Zeinelabdin; Supervisor,- Awadalla Tayfour Ali (Sudan University of Science and Technology, 2011-02-01)
    The amount of information, which is generated in the substation automation systems, has grown exponentially since the introduction of intelligent electronic devices (IED). Until recent years substation communication ...
  • Performance of High Power Amplifier (HPA) in Orthogonal Frequency Division Multiplexing (OFDM) 
    AL-fadhali, Najib Mohammed Ahmed; Supervisor - Mohammed Husain (Sudan University of Science and Technology, 2012-06-01)
    Orthogonal frequency-division multiplexing (OFDM) is an attractive transmission technique for high-bit-rate communication systems. The required transmit power needed for overcoming transmission loss between transmitter and ...
  • Improving of Automatic Term Recognition in Biotagging Systems 
    Zaid, Rasha Ramadan; Supervisor - Abdlrasoul G. Alzebaidi (Sudan University of Science and Technology, 2013-01-01)
    Elaborated information technologies are crucial for effective data acquisition and integration from growing body of the biomedical literature. Successful term recognition is the key to getting access to the stored literature ...
  • Designing Graphical User Interface for Initial Planning of Long Term Evolution Network 
    Hashim, Sheemaa Ali Mohamed; Supervisor - Jacqueline John George (Sudan University of Science and Technology, 2012-02-01)
    Long Term Evolution (LTE) has engaged the attention of wireless operators, investors, and industry watchers around the world in the late years. LTE was initiated by Third Generation Partnership Project (3GPP), to maintain ...
  • Electronic Monitoring Revolution Per minute (RPM) of an Aircraft Engine Propeller 
    Marzoug, Hajir Elsheikh Elmakawi; Supervisor - Abdel Rasoul Jabar Alzubaidi (Sudan University of Science and Technology, 2011-03-01)
    The knowledge of R.P.M. of the aircraft engine propeller is very important to give the maximum help, during the various stages of aviation stage. Each stage of phases flight (take-off , cruise and landing) need acertain ...
  • Critical Contingency Study of Sudan National Grid For Electricity 
    Farah, Ahmed Omer; Supervisor - Khamis Arbeesh Saad Eldin (Sudan University of Science and Technology, 2012-03-01)
    The main target and objective of this thesis is to avoid blackouts and to have a secure operating point with loadings of the transformers and transmission lines, below their limits to have a good margin for N-1 contingency ...
  • Vertical Lathe Machine Control Using Programmable Logic Controller 
    KAJALA, AHMED MOHAMMED AHMED; Supervisor,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2011-04-01)
    The aim of this study is to control Double Column Lathe Vertical Machine, using programmable logic controller (PLC) instead of conventional control. As PLCs are now involved in most industrial processes, therefor, ...
  • Effect of Control Points Number On djusting Satellite Imagery 
    Abdella, Abuelhassan Ali Idriss; Supervisor - Naji Zomrawi (Sudan University of Science and Technology, 2011-06-01)
    Traditional survey methods become tedious and time consuming and hens very cost with large scale surveys. In recent years remote sensing imagery was adopted to reduce the cost and facilitate the survey works. These images ...
  • A New Vision for Design of Steel Transmission Line Structures 
    Abdolsamad, Khalied Abdel Wahab Abdalla; Supervisor - Salih Elhadi Moh. Ahmed (Sudan University of Science and Technology, 2009-12-01)
    A reliability design method for statically determinate steel A reliability design method for statically determinate steel transmission lines towers and poles is presented. The method is in a Load and Resistance Factor ...
  • Appropriateness of Clinical Laboratory Photometers Quality Requirements 
    Elkhalifa, Issam Osman Elhassan; Supervisor - Alnazier Osman Mohamed Hamza (Sudan University of Science and Technology, 2011-01-01)
    The aim of this study is to evaluate the efficiency and calibration of laboratories, spectrophotometers according to the specification (ISO 15189) and depending on the conditions (4.2.5 and 5.3.2) included in the items of ...

Search SUST


Browse

My Account