College of Engineering: Recent submissions

  • Integration of GPS and GIS as Applied on the Design of a Reliable Cadastral System 
    ABDEL AZIZ, ABDEL RAHIM ELHAG; Supervisor, K.M.Badi (Sudan University of Science &Technology, 2009-09-01)
    The significance of cadastre arises from its field of application which is the land. Land is the foundation of all forms of human activity. Land management for different purposes needs an efficient cadastral system. The ...
  • A DESIGN OF A FINGERPRINT RECOGNITION SYSTEM 
    Faris, Joyada Fayz Botros; Supervisor - Jacqueline. J. George (Sudan University of Science &Technology, 2009-02-01)
    This project is to investigate the techniques for fingerprint recognition. This target can be mainly decomposed into image preprocessing. Feature extraction and feature match. For each sub-task, some classical and up-to-date ...
  • SOLID WASTE MANAGEMENT IN KHARTOUM 
    ElHigzi, Fairuz Abdelrazig M; Supervisor - Awad Saad Hassan (Sudan University of Science &Technology, 2009-09-01)
    The study is to asses solid waste management in khartoum that is concerned about defining waste and waste generation at source, forming different types of waste, means of collecting the waste and the hazard accompaning ...
  • Use of PLC in Steel Factories:Sudanese Malaysian Factory for steel industries 
    Koko, Jamal Mohammed; Supervisor - Abd Alla Salih (Sudan University of Science &Technology, 2009-07-01)
    In all segments of industry the route toward increase productivity through increasing the use of automation systems, which may be required to directly increase output quality, or to improve product quality and precision. ...
  • Remote Control via GSM Network 
    Elhadi, Mohamed Osman Ahmed; Supervisor - Abd Alrasol Jabar Alzubaidy (Sudan University of Science &Technology, 2010-08-01)
    Today every thing is going to be digital and wireless, and the cell phone is the key player in wireless technology, the trends in wireless technology changing day-by-day and today the work is going on how to develop remote ...
  • Design And Simulation Of Intelligent Multi - Coriteria Vertical Handover Model For Wirless NGN 
    Hsssan, Sayid Gudb Ibrahim; Supervisor - Ashraf Gasim (Sudan University of Science &Technology, 2009-06-01)
  • Heavy current device control Using a mobile set 
    Hassan, Azza Ali Said; Supervisor - Abd alrasoul Gabbar Alzibaidi (Sudan University of Science &Technology, 2009-02-01)
    Recently there is rapidly development in communication methods that make the world as a small village. The important sight of these progresses is using a mobile phone every way in the life. The objective of this ...
  • Evalution Of CDMA Mobile System : Case Study Of Sudani 
    Ali, Khalid Abdeen; Supervisor - Ashraf Gasim (Sudan University of Science &Technology, 2008-12-01)
    The aim of this study to improve the quality of service and improve performance of the Third mobile generation network. This thesis deeply concentrates on evaluation of 3G. case study Sudani network. The main focus was ...
  • تأثير نوع ونسبة البتيومين والفراغات الهوائية على الخلطات الاسفلتية 
    عبد الرحمن, إنصاف محمد; مشرف - سامى عبدالله عثمان (جامعة السودان للعلوم والتكنولوجيا, 2009-03-01)
    تلعب صناعة الطرق دورا ً اساسيا ً في التنمية الاقتصادية والخدميه وتمثل العمود الفقري في التنمية الصناعية ،ترجع أهمية تصميم الخلطة الأسفلتية للمحافظة والإستمرارية علي الطرق . تعتمد جودة الخلطة الأسفلتية علي مكونات الخلطة ...
  • Probabilistic Seismic Hazard Assessment and Seismic Design Provisions for Sudan 
    Hassaballa, Ali Eltom; Supervisor, Abdelrahman el-Zubair Mohamed (Sudan University of Science &Technology, 2009-12-01)
    Seismic hazard can be evaluated by calculating the different factors of seismic design such as seismic acceleration, velocity or displacement, which are the necessary factors to be used in designing buildings and structures ...
  • Analysis of High-Rise Buildings Under Cyclic Loads : Wind and Earthquakes Loads 
    Mohammed, Abbas Mahgoub A.rahman; Supervisor - Abdel Rahman Elzubair Mohammed (SUDAN UNVERSITY OF SCIENCE AND TECHNOLOGY, 2009-01-01)
    This research is concerned with the study of the effects of wind and earthquakes on tall buildings. Tall buildings are buildings in which the slenderness ratios (heights to the smaller plan dimensions) are large, this makes ...
  • Smart Home Model Design 
    Awad, Salma El-Gineid; Supervisor - Abd Al-Rasoul Gabbar (SUDAN UNVERSITY OF SCIENCE AND TECHNOLOGY, 2009-01-01)
    In this research we talked about circuit designed as a model for smart home, this circuit content several (IC'S): SN74373, ULN2003 and devices (boilers chiller micro switch) and connected to the computer to assist the ...
  • Method of Improvement the Performance of Three Phase Horizontal Separator : Case Study in Palouge Field 
    Faris, Mohamed Hussein M.; Supervisor - Mohammed Eltayeb Mansour (SUDAN UNVERSITY OF SCIENCE AND TECHNOLOGY, 2009-01-01)
    Oil industry is one of the most profitable incomes to the countries depending on the oil quality. Oil qualities such as American Petroleum Institute (API), water content, sulfur, gas, contaminations, etc.. Separation ...
  • COMPARISON BETWEEN MARSHAL AND SUPERPAVE METHODS FOR ASPHALT MIX 
    Eidam, Abubaker Ibrahim; Supervisor - Sami .A. Osman (Sudan University of Science &Technology, 2009-12-01)
    ABSTRACT The developing country has implemented Superpave on all National Highway system projects since 1997. The decision regarding implementation of Superpave for other country is still under review and need for big ...
  • Use of Airpak to Simulate Indoor Environment in Haggar Maintenance Workshop 
    Abdo, Elwathig Mohammed Mahmoud; Supervisor - Salah Ahmed Abdalla Ahmed (Sudan University of Science &Technology, 2009-02-01)
    ABSTRACT This thesis is concerned with indoor environment modeling and simulation in order to provide a good indoor air quality and an acceptable thermal comfort. The two common approaches of simulation (Computational ...
  • CAD for Progressive DIE : Case study 
    AHAMED, OSMAN AHAMED MOHAMMED; Supervisor - ALKHAWAD ALI ELFAKI (SUDAN UNVERSITY OF SCIENCE AND TECHNOLOGY, 2010-01-01)
    This research presented a new method for the mass production of a high quality, low cost, sheet metal products using a die, press and transferring mechanism. The research presented a definition of the tool (die), its ...
  • Front End Voice Ciphering 
    Saeed, Omaya Mohamed Nour Mohamed; Supervisor - Saad Daoud Sulaiman (Sudan University of Science &Technology, 2009-08-01)
    ABSTRACT The Atmel AVR microcontrollers are excellent for signal processing applications due to their powerful architecture, strong instruction set and built-in multi-channel 10-bit Analog to Digital Converter (ADC). ...
  • مشكلات ادارة مشاريع الطرق بولاية الخرطوم وحلولها:دراسة حالة طريق اراك صالح 
    حسين, آمنة محمد نصر; مشرف - سامي عبدالله (جامعة السودان للعلوم والتكنولوجيا, 2009-03-01)
    تجريد يتناول البحث مشكلات ادارة مشاريع الطرق بولاية الخرطوم وحلولها وذلك بعمل دراسة حالة لطريق قرية آراك صالح تناقش الدراسة الاجراءات المتبعة من قبل الوزارة فى عمل العطاءات وترسيتها واختيار المقاول وطريقة التعاقد وطريقة ...
  • Tribological Study for a New Designed Axial Engine by using CAE 
    Abdellatif, Nasreldin Alzain; Supervisor - Ali Mohamed Ali Elseory (Sudan University of Science &Technology, 2010-07-01)
    Abstract In this thesis the concept of the axial engine was studied and a new design of the axial engine was proposed. The whole engine was modeled in computer aided design (CAD) software (SolidWork). The tribological ...
  • التحكيم في المنازعات الهندسية 
    عثمان, حذيفة بشير محمد; مشرف - سلمي يحي محمد (جامعة السودان للعلوم والتكنولوجيا, 2009-07-01)
    مستخلص شهد قطاع التشييد والبناء بالسودان انتعاشاً كبيراً في حجم الاستثمارات المالية وظهور الشركات العملاقة مما أثمر وبشكل كبير عن ظهور الخلافات بل و المنازعات نتيجة لتضارب المصالح. فالمنازعات بين الأطراف التعاقدية هي ...

Search SUST


Browse

My Account