College of Engineering: Recent submissions

  • Inspection & Testing of Pipeline welding : Multi Product Exporting Pipeline 
    A.Alla, Elssawi Ali; Supervisor - Elkhawad Ali Elfaki (Sudan University of Science & Technology, 2005-11-01)
    This study was carried ot in order to revise the x-ray and ultrasonic test results done on the welded joint of the multi product exporting pipeline. The welding practise was carried out as per API 1104 code. The study ...
  • SIMULATION OF STANDARD TELECONTROL PROTOCAL IEC 6087O-5-101 
    ELMANSOUR, TARIG MOHAMED; Supervisor - ABDEL RASOUL JABAR ALZUBAIDI (Sudan University of Science & Technology, 2006-11-01)
    The use of the telecontrol protocols helps developing of control systems. Technical and commercial competitions produce several protocols with different functions and specifications. This leads International Electrotechnical ...
  • INVESTIGATIONS OF ARECEIVER CLOCK BIAS USING PSEUDO-RANGE POINT POSITIONING SOLUTION 
    MOHAMED, AHMED ISHAG OMER; Supervisor - Mohamed A. Khalid (Sudan University of Science & Technology, 2006-02-01)
    Receiver’s clock behaviour is studied using pseudo-range model assuming satellite position as correct. A single point solution was carried out solving for approximate values of Receiver position, (three Cartesian coordinates) ...
  • BUILDING MANAGEMENT SYSTEM (BMS) CONCEPT&DESIGN 
    Elrayah, Tilal Eltayeb Elsheikh; Supervisor - Abd Alrasool Gabbar (Sudan University of Science & Technology, 2006-11-01)
    All buildings have some form of mechanical and electrical services in order to provide the facilities necessary for maintaining a comfortable working environment. These services have to be controlled by some means to ensure, ...
  • Design & Implementation of Integrated Circuit Tester 
    Osman, Mustafa Osman Ali; Supervisor - Abd Alrasol Jabar Alzubaidy (Sudan University of Science & Technology, 2006-12-01)
    Nowadays, technology has been consecutively developing. However, silicon technique (semiconductors), which had made great development, specially integrated circuits (ICs). The ICs consist of a large different number of ...
  • POWER OPTIMIZATION IN THE THIRD GENERATION MOBILE PHONES 
    ABD ELSADIG, KAMAL OMAR ABDELLA; Supervisor - SHRAF GASIMELSID ABDALLA (Sudan University of Science & Technology, 2006-11-01)
    Due to its improved capabilities for mobile communication, power consumption in 3G phones acts a major role that affects overall system performance. Therefore, the research viewed the problem of power optimization in 3G ...
  • VOICE OVER INTERNET PROTOCOL SECURITY (VOIPsec) 
    MOHAMED, ELFADIL ABDELRAHMAN; Supervisor - SHRAF GASIM ELSEED (Sudan University of Science & Technology, 2006-11-01)
    The thesis examines the voice over internet protocol (VOIP) technology by theoretically studding the basic components, basic architecture, and call establishment of the VOIP system standard protocols (H.323, SIP).VOIP ...
  • Implementation of IPSec Linux Routers 
    Ishag, Khalid Mohammed Saleh; Supervisor - Yahia Adballa Mohammed (Sudan University of Science and Technology, 2010-05-01)
    IPSec is a framework of open standards for ensuring private communications over IP networks which has become the most popular network layer security control. It can provide several types of data protection: confidentiality, ...
  • Digital Filler Design Using Matlab 
    Hamza, Haifa Abdelgadeir Ahmed; Supervisor - Abd Al-Resoul Jabbar Alzubaidi (Sudan University of Science and Technology, 2010-01-01)
    Signals from the sender to the receiver or within the devices are subject to noise due to electromagnetic waves between the signals or because of climate change and other reasons. This noise affects the original signal, ...
  • aduate Studies Performance Characteristics of A turbo Charged Engine with E G R 
    Omer, Eihab Abdelraouf Mustafa; Supervisor - Sabir M Salih; Supervisor , Sabir M Salih (Sudan University of Science and Technology, 2008-01-10)
    ( NO x ) Is a generic term for mono-nitrogen oxides (NO and NO2). These oxides are produced during combustion, especially combustion at high temperatures. At ambient temperatures, the oxygen and nitrogen gases in air ...
  • .Feasibility Study of Using Precast Concrete Products for Residential Buildings in Sudan 
    Almakki, Mudthir Bakri Hassan; Supervisor - Abdalla M. T. Shigidi (Sudan University of Science and Technology, 2007-11-01)
    A methodology was developed to perform economic and financial feasibility for a precast concrete factory which is expected to produce beams, slabs, columns and stairs. The aim was to find a low cost alternative to ...
  • PROGRAMMING THE AT89C51 TO CONTROL THE TEMPERATURE OF POWER STATION 
    ALIMAM, YOUSIF ISHAG MOHAMED; Supervisor - ABDALLAH SALIH ALI (Sudan University of Science and Technology, 2005-09-10)
    This research is to implement microcontrollers to control the superheated steam (main steam) temperature in power plants. There are many types of main steam temperature control, one of them is steam desuperheating ...
  • Using Standard Parts Retrieval To Enhance The Productivity Of AutoCAD 
    A.elgadir, Nasreldin Dafaalla; Supervisor - abdelfaltah Bilal (Sudan University of Science and Technology, 2005-01-10)
    Drawing is the most important issue in design, since it is used in communicating the design to the production staff. Due to the above reasons we prepare a program in side the AutoCAD (customize AutoCAD ...
  • Software Defind Rodios for Third Genration ( SDR for 3G ) 
    Salih, Sami Hassan Omer; Supervisor - Abdel Rasoul Alzubaidi (Sudan University of Science and Technology, 2006-12-01)
    The worldwide standards bodies have developed multiple standards for high- and low-tier cellular and PCS. While each carrier has plans for offering service based on a specific standard, the multiplicity of standards ...
  • Handoffs in Cellular Wireless Networks 
    Mohammed, Khalifa Dai Elnour; Supervisor - Ashraf Gasim Elsid (Sudan University of Science and Technology, 2006-08-01)
    Wireless network is connecting between many nodes without wire line and using network protocols to do this. Network protocols in cellular wireless data network must update routes as a mobile host between cells. These routing ...
  • Minimization of Distribution System Harmonics : Case Study Sudanese Malaysian Steel Factory 
    Mustafa, Mustafa Ahmed Dafalla; Supervisor - Eisa Bashier Mohammed (Sudan University of Science and Technology, 2006-06-01)
    The Harmonics in Distribution Systems come from transformers or saturable reactors, arc furnace, welding machines, florescent lamps, rotating machines and power electronics devices. In general, the non linear loads in which ...
  • Evaluation of Stability of Asphalt-Pavements Study to Verify Marshal Method Case Study : Qassim-Madina Expressway 
    Adam, Taha Mohamed; Supervisor - Omar Abd-Alnabi (Sudan University of Science and Technology, 2006-07-01)
    Hot-mix asphalt, (HMA), is a one of composite material that used for pavement. For this research, HMA is prepared by using Marshal Method for mix design. Marshal method assumes that the bitumen is a binder that binds the ...
  • Enhance Capacity of CDMA Network 
    Hassan, Abdoul Whab; Supervisor - Shraf Gasim Elsid (Sudan University of Science and Technology, 2006-01-01)
    CDMA cellular mobile systems find acceptance particularly in regional centers where there are large geographical areas to cover. The capacity of a CDMA system is limited by the reverse link. The reverse link uses ...
  • A STUDY OF REAL TIME CONTROL APPLICATIONS 
    HAMEDAN, YASIR BABIKER; Supervisor - EISA BASHEIR (Sudan University of Science and Technology, 2007-02-01)
    This Dissertation deals with how to support the Real-Time Applications in Control System. First of all reviewing the characteristics of real-time applications. Observing that, contrary to the popular view that Real-Time ...
  • INSTRUMENT ENGINEERING STANDARD FOR KHARTOUM REFINERY COMPANY 
    Shiekhidriss, Abd elrahman Abd elgadier; Supervisor - Eltahir Mohamed Hussein (Sudan University of Science and Technology, 2007-02-01)
    This standard is applicable for the erection and acceptance of the industrial and civil instrumentation engineering work for khartoum refinery company. The mentioned above standard is being collected through so many ...

Search SUST


Browse

My Account