Please use this identifier to cite or link to this item:
https://repository.sustech.edu/handle/123456789/15098
Title: | Simulation of Delayed Coking Unit in KRC |
Other Titles: | محاكاة وحدة التفحيم المؤخر في مصفاة الخرطوم |
Authors: | Alfeel, Asmaa Mohamed Mahgoub Mohamed, Algeily Altaj Ali Lo-Lujo, Emmanuel Onesimo Yabang Mahmoud, Lowi Azhari Mohamed |
Keywords: | Delayed Coking Unit Simulation |
Issue Date: | 1-Oct-2016 |
Publisher: | Sudan University of Science & Technology |
Citation: | Alfeel،Asmaa Mohamed Mahgoub .Simulation of Delayed Coking Unit in KRC/Asmaa Mohamed Mahgoub Alfeel,Algeily Altaj Ali Mohamed ,Emmanuel Onesimo Yabang Lo-Lujo...etc؛Isra Osman Koko.-khartoum: Sudan University of Science & Technology, College of Petroleum Engineering and Technology, 2016.-41P:ill; 28cm.-Bachalore. |
Abstract: | Abstract: Crude oils around the world tends to be more dense in recent years and needs to be treated in a suitable way, one way is the use of thermal cracking processes. One of these processes is the delay cocking which is a unit to recover light products from heavy crudes besides producing petroleum coke. Fula crude is heavy crude which enter the delay coking unit in Khartoum refinery after mixing it with Petrodar crude that comes from Southern Sudan. In this thesis, simulation of the real process in Khartoum refinery has been done using Aspen HYSYS simulator, and the effect of varying the mixing ratio on the unit yield was tested. It was found that different mixing ratios have approximate results and were very close to the data of Khartoum refinery where the Fula crude is the sole feed. Correlation calculation was conducted, the results were compared with simulation results and the original process data and it was found that the results were also close in some products yields but are varying in others such as diesel and HCGO. In this thesis also some aspect of coking drum design and calculation were conducted. Key words: simulation, delayed coking unit, coke drums design, aspen HYSYS. طرق التكسير الحراري للخامات النفطية أصبحت واسعة الاستخدام على مستوى العالم بسبب ميل الخامات في الآونة الأخيرة لأن تصبح أكثر كثافة. و من هذه الطرق طريقة التفحيم المؤخر في وحدة التفحيم و التي تقوم باستخلاص المنتجات الخفيفة من الخامات الثقيلة بالاضافة لانتاج الفحم. خام الفولة و هو خام ثقيل تتم معالجته في وحدة التفحيم المؤجل في مصفاة الخرطوم حيث يتم مزجه مع خام بترو دار القادم من جنوب السودان. في هذا البحث تم عمل محاكاة لما يحدث في المصفاة باستخدام برنامج المحاكاة Aspen HYSYS حيث تم تجربة مزج الخامين بعدة نسب وووجد أن نتائج تغير النسب متقاربة جداًو قريبة من البيانات المتحصل عليها من المصفاة عندما يكون خام الفولة هو الخام الوحيد الداخل إلى الوحدة. تم عمل حسابات باستخدام المعادلات و قورنت بنتائج المحاكاة و ببيانات العملية الحقيقية الحادثة في المصفاة و وجد أن النتائج أيضاً قريبة في بعض المنتجات و مختلفة الى حد ما في البعض الآخر مثل الديزل و زيت التفحم الثقيل و تم عمل تصميم لحاوية الفحم الخاصة بالوحدة. |
Description: | Bachelor Research |
URI: | http://repository.sustech.edu/handle/123456789/15098 |
Appears in Collections: | Bachelor of Petroleum Engineering & Technology |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Simulation of DCU in KRC .pdf | Research | 1.56 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.