SUST Repository

Browsing Bachelor of Petroleum Engineering & Technology by Title

Browsing Bachelor of Petroleum Engineering & Technology by Title

Sort by: Order: Results:

  • Aldood, Saeed Ahmed Hamid; Dut, Achai Ring Majok; Ali, Ahmed Yousef Ahmed; Abdelnabi, Mohammed Musa Ali (sudan university of science & technology, 2018-10-01)
    While searching to optimize the production rate dealing with a treatment of heavy oil crude in FNE, Fula North East “FNE” is a perfect nominee to this thermal recovery according to its high density “0.95” and high viscosity ...
  • Mohammed, BabikerAbdelgadir; NourEldaim, Mohammed Abdelbagi; Husain, Mohammed Ismaeel Osman; Ahmed, Mojahid Mohammed Gasmallah; Supervisor - Mohammed Ahmed Mohammed Naiem (Sudan University of Science and Technology, 2014-09-01)
    Drilling operation is very important in oil and gas industry, so we must choose an optimum bit with high performance and low cost. There are many methods used for evaluating bit performance such as: Cost per foot (CPF), ...
  • Eltygani, Mohamed Gaafar; Mohamed, Mogahid Elmahi; Albalolh, MunibAbd Alrahim; Awadalkarim, Sultan Ahmed (sudan university of science & technology, 2018-10-01)
    Managing sand production is critical in Fulafield operation. Solid productionis often causing issues with completion and surface facilities. Sand management and prevention are the current practices and leaving sand control ...
  • Abdulrahman, Mohammed Alnoor Aldegail; Adam, Sufian Hassan Mohammed; AbdelRahman, Reda Ismail Adam; Alojaiba, Eltayeb Omer; Supervisor - Abbas Musa Yagoup (Sudan University of Science and Technology, 2015-10-10)
    The study has been made in the Red Sea area block15 to predict pore pressure of the formation using Eaton method which considered being one of the indirect methods of calculation and estimation of pressure. This method ...
  • Hassan, Ahmed Hassan Ismael; Ramadan, Hamid Ahmed Ibrahim; Turja, Hamid Suleiman Hamid; Alamin, Mohammed Ali Mohammed; Supervisor, - Mohamed Mirghni (Sudan University of Science & Technology, 2017-10-12)
    The progressive cavity pump (PCP) is one of the best method of artificial lift which achieves the economic goals which achieve the country and company policies. Its component and function and the factor affecting it have ...
  • Yaqoup, Mahmoud Hassan; At-tijani, Mustafa Okasha; Abdalla, Mortada Ahmed; Omer, Mohammed Hassan (Sudan University of Science & Technology, 2016-11-01)
    Human development is closely linked to energy consumption, natural gas is environmental friend energy source compared with other sources, so it demand increases by a day, and represent almost one third of the global primary ...
  • Osman, Babiker Adel Babiker; Abdul-Aziz, Mohammed Ahmed Hassan; Alshiekh, Mohammed Banaga Musa; Ahmed, Nafisa Hammad Mohammed; Supervisor, -Nihad Omer Hassan (Sudan University of Science and Technology, 2017-10-04)
    Nowadays, and globally our people severe from environmental pollution, and care about energy supply stability. As we all know that petroleum base fuels have harmful nonfriend emissions like Nox, and Sox so we look after ...
  • Alden, Mohammed Mubarak Sheik; Omer, Babiker Hassan; Supervisor - Isra Osman Mohammed (Sudan University of Science and Technology, 2014-09)
    Methyl tertiary butyl ether (MTBE) is primarily used in gasoline blending as an octane enhancer to improve hydrocarbon combustion efficiency. Of all the Oxygenates, MTBE is the most attractive for a variety of technical ...
  • Nasereldeen, Ahmed; Ahmed, Ahmed Galaleldeen; Mohammed, Mohammed Osman; Ahmed, Abdelrahim Mahmoud; Supervisor, -Mohanned Mahjob Khairy (Sudan University of Science and Technology, 2017-10-04)
    Most of the Sudanese fields face the challenges of maintaining production rates, which are decreasing at a large rate annually. This project aims to find a solution that helps to improve the production rates in Fula Field ...
  • Ali, Ahmed Mohamed; Mustafa, Abdelrahman; Abdalla, Hassan modaser; Mohammed, Mohammed Alsir (Sudan University of Science & Technology, 2016-10-01)
    This work aimed to accurately identify and solve production issues in Sudanese field using pipeline network modeling. Pipeline network plays important role in delivering the production from wellhead to Field Processing ...
  • Omer, Ayman Mjdoub Mhjoub; Elamin, Mohamed Elamin Ahmed; Fadl alla, - Mohanned Abdalgadir Mohamed; Alhassan, - Omer Elamin Mohamed; Supervisor - Mohamed Ahmed Mohamed Naeem (Sudan University of Science and Technology, 2014-09-01)
    The well casing conceder one of the most important process during drilling and production so that must be designed carefully; there are many problems face the casing, one of this problems is leakage pressure such as that ...
  • mohammed, Ahmed Abdelrahman; mohammed, Mohamed Albager; Ahmed, Musab Mukhtar (Sudan University of Science & Technology, 2016-10-01)
    The major source of producing LPG in Sudan is from oil refining. The objective of this work is to Recover natural gas liquids and produce LPG from associated gas produced . The unit will consist of two parts: refrigeration ...
  • Ibrahim, Ahmed Ibrahim Ahmed; Hamid, Hamid Tag-elsier; Talib, Osman Hussein Ali; Basher, Musa Fathi Musa; Abd-elmahmod, Muzamil Ahmed (sudan university of science & technology, 2018-10-01)
    The objective of this project is to reduce the naphthenic acids from Al-Fula crude oil by using decarboxylation technology based onmagnesium oxide and zeolite as catalysts.The naphthenic acid reduction operation started ...
  • Mohammed, Almuntasir Bellah; Haroun, El-hindi Sayed; Badwi, Muntasir Mohammed; Abd Alaziz, Mortada Abd Alhafeez (sudan university of science & technology, 2018-10-01)
    Gas lift is one of the best method of artificial lift which achieves the economic goals which achieve the country and company policies. The aim of the study is minimizing the viscosity of the oil by reaching the dilution ...
  • Alzubair, Abdelelah Hashim; Abazar, Alkhatim; Faroug, Mansor Ibrahim; Magzoub, Mohamed Abdelrahman (sudan university of science & technology, 2018-10-01)
    Sabaloka region comprises some of the old basement rocks in Sudan surrounded with Cretaceous sediments forming an inlier, extending between Khartoum and River Nile States. The study area is located inside this inlier ...
  • Dahab, Amir Mohamed Jamal; Osman, Omar Salah Hassan; Ibrahem, Moayad Mohamed Bahageel; Hamad, Mohamed Al Daw Hemida; Mohey Aldin, Mohamed Almudather (Sudan University of Science & Technology, 2016-10-01)
    The present study could provide valuable informations will be helpful in oil production from Bentiu formation in the future. The study objective is to characterize the reservoir rocks of Bentiu formation in the Muglad rift ...
  • MOHMMED, ABDULRAHEEM ABDULBAGY ALI; ALSAWADI, AHMED MOHAMMED AHMED; ABDALLA, AHMED MUSTAFA MABROUK; ALAGHA, FERAS TAMEEM NIFE (Sudan University of Science & Technology, 2016-10-01)
    Special core analysis data (SCAL) is one of the important data which obtained by applying tests on samples which extracted from oil reservoirs to determine the reservoir formations properties such as (overburden pressure, ...
  • Balah, Ali Hassan Ali; Fadlalla, Muzamil Abdelwahab Abdalla; Ismail, Tariq Ahmed Mohammed; Awet, Thomas Edward Batista; Supervisor - Sami Abdelrahman Musa (Sudan University of Science & Technology, 2014-09-01)
    The primary objective of this research is to obtain an optimum concentration of alkali, surfactant and salt that can achieve the ultra-low interfacial tension, previous studies have shown that high performing surfactant ...
  • Ahmed, Elgazali Mohamed; Mohamed, Magdi Elnorani; Salih, Mohamed Mahir Mohamed; Yousif, Yousif Abdallah (sudan university of science & technology, 2018-10-01)
    To introduce efficiency and cost savings in drilling operations, clients in Sudan have started to focus on Cluster Wells drilling, which is basically the same concept as platform drilling in offshore environment. Multiple ...
  • Mustafa, Adam Ahmed Abdalla; Abdalla, Alhassan Abdalrhman Hassan; Mohammed, Ehab Mustafa Abdalgader; Supervisor - Zienab Abdallah (Sudan University of Science and Technology, 2014-09-01)
    Cryogenic air separation is a process by which highly purified gases or liquids are produced. This is achieved by taking large volumes of air from the atmosphere, which is then compressed, cooled, and liquefied. Through a ...

Share

Search SUST


Browse

My Account