SUST Repository

Browsing Bachelor of Petroleum Engineering & Technology by Title

Browsing Bachelor of Petroleum Engineering & Technology by Title

Sort by: Order: Results:

  • Aldood, Saeed Ahmed Hamid; Dut, Achai Ring Majok; Ali, Ahmed Yousef Ahmed; Abdelnabi, Mohammed Musa Ali (sudan university of science & technology, 2018-10-01)
    While searching to optimize the production rate dealing with a treatment of heavy oil crude in FNE, Fula North East “FNE” is a perfect nominee to this thermal recovery according to its high density “0.95” and high viscosity ...
  • Adress, Alsadig Mohammed Osman Altom; Salih, Hana Salih Mohammed; Babiker, Ibrahim Hashim Ibrahim; Hamad, Rofida Alhadi Mohammed; Supervisor, - Ahmed Abdelaziz Ibrahim (Sudan University of Science & Technology, 2020-11-01)
    Generally, Formation Damage can be defined as any reduction in near well bore permeability which is the result of any material from drilling, completion, production, injection, attempted stimulation or any other well inter. ...
  • Mohammed, BabikerAbdelgadir; NourEldaim, Mohammed Abdelbagi; Husain, Mohammed Ismaeel Osman; Ahmed, Mojahid Mohammed Gasmallah; Supervisor - Mohammed Ahmed Mohammed Naiem (Sudan University of Science and Technology, 2014-09-01)
    Drilling operation is very important in oil and gas industry, so we must choose an optimum bit with high performance and low cost. There are many methods used for evaluating bit performance such as: Cost per foot (CPF), ...
  • Mohamed, Abas Yuosif Ahmed; Mohammed, Alaaedien Osman Ahmed; ahmed, Khalid Hussein Osman; Mohamed, Sami Abd alwahab Alsafi; Paboum, Ruay Kai Ter; Supervisor, - Mohanned Mahgoub Khairy (Sudan University of Science & Technology, 2020-11-01)
    Hydraulic jet pumpit’sone of the artificial lift method. The conept of this pump depends on creating a pressur difference at the bottom hole by pumping the power fluid with a larg pressure and flow rate, and the pressure ...
  • Eltygani, Mohamed Gaafar; Mohamed, Mogahid Elmahi; Albalolh, MunibAbd Alrahim; Awadalkarim, Sultan Ahmed (sudan university of science & technology, 2018-10-01)
    Managing sand production is critical in Fulafield operation. Solid productionis often causing issues with completion and surface facilities. Sand management and prevention are the current practices and leaving sand control ...
  • Dafa Alla, Adam Mohammed Ahmed; Mohamed, Babiker Alhassan Mohammed Ali; Eid, Buraei Mohammed Al Helo; Mohammed, Mazin Abdalhameed Ismael; Supervisor, - T. Amro Yusuf (Sudan University of Science & Technology, 2020-10-01)
    Water saturation estimation by interpretation of Archie’s model in clean formations has successfully been used over the years. However, due to shale or clay effects in shaly sand formation this model results in inaccurate ...
  • Ahmed, Ahmed Abd AlRahman; Saeed, Ahmed Adam Mohamed; Edrees, Alsamaual Abdu; Ahmed, Magdi Ahmed Adam; Supervisor, - Hamid Suliman (Sudan University of Science & Technology, 2020-10-01)
    Pipelines are widely used for the transportation of hydrocarbon fluids over millions of miles all over the world. The structures of the pipelines are designed to withstand several environmental loading conditions to ...
  • Abdulrahman, Mohammed Alnoor Aldegail; Adam, Sufian Hassan Mohammed; AbdelRahman, Reda Ismail Adam; Alojaiba, Eltayeb Omer; Supervisor - Abbas Musa Yagoup (Sudan University of Science and Technology, 2015-10-10)
    The study has been made in the Red Sea area block15 to predict pore pressure of the formation using Eaton method which considered being one of the indirect methods of calculation and estimation of pressure. This method ...
  • Hassan, Ahmed Hassan Ismael; Ramadan, Hamid Ahmed Ibrahim; Turja, Hamid Suleiman Hamid; Alamin, Mohammed Ali Mohammed; Supervisor, - Mohamed Mirghni (Sudan University of Science & Technology, 2017-10-12)
    The progressive cavity pump (PCP) is one of the best method of artificial lift which achieves the economic goals which achieve the country and company policies. Its component and function and the factor affecting it have ...
  • Yaqoup, Mahmoud Hassan; At-tijani, Mustafa Okasha; Abdalla, Mortada Ahmed; Omer, Mohammed Hassan (Sudan University of Science & Technology, 2016-11-01)
    Human development is closely linked to energy consumption, natural gas is environmental friend energy source compared with other sources, so it demand increases by a day, and represent almost one third of the global primary ...
  • abdelfatah, Abu-Bakr Abdulla khaier; Fadoul, Alaaeldein Nasereldein Ali; Hamid, Mohammed Abdalrouf Mohammed; Idreis, Mohammed khaled Ahmed; Supervisor, - Abdalhakm Eltayeb Mohamed (Sudan University of Science & Technology, 2020-11-01)
    Pore pressure prediction prior drilling a well is most essential for selection of casing, setting depth, and optimum mud weight . If the pore pressures are not accurately predicted prior to drilling, catastrophic incidents, ...
  • Mustafa, Husam Alden Mustafa ZainAlabdeen; Mustafa, Mustafa Mohammed Ali; AbdAlnabi, Almahadi Adam; Musa, Mohannad Abdaljalil; Supervisor, - Elham Mohammed Mohammed Khair (Sudan University of Science & Technology, 2020-10-01)
    Chemical Water shut-off appears as an effective tool for blocking unwanted water zones; the techniques require chemical placement or injection into the reservoir to treat fluids in the target zone. Many types of chemicals ...
  • Osman, Babiker Adel Babiker; Abdul-Aziz, Mohammed Ahmed Hassan; Alshiekh, Mohammed Banaga Musa; Ahmed, Nafisa Hammad Mohammed; Supervisor, -Nihad Omer Hassan (Sudan University of Science and Technology, 2017-10-04)
    Nowadays, and globally our people severe from environmental pollution, and care about energy supply stability. As we all know that petroleum base fuels have harmful nonfriend emissions like Nox, and Sox so we look after ...
  • Alden, Mohammed Mubarak Sheik; Omer, Babiker Hassan; Supervisor - Isra Osman Mohammed (Sudan University of Science and Technology, 2014-09)
    Methyl tertiary butyl ether (MTBE) is primarily used in gasoline blending as an octane enhancer to improve hydrocarbon combustion efficiency. Of all the Oxygenates, MTBE is the most attractive for a variety of technical ...
  • Nasereldeen, Ahmed; Ahmed, Ahmed Galaleldeen; Mohammed, Mohammed Osman; Ahmed, Abdelrahim Mahmoud; Supervisor, -Mohanned Mahjob Khairy (Sudan University of Science and Technology, 2017-10-04)
    Most of the Sudanese fields face the challenges of maintaining production rates, which are decreasing at a large rate annually. This project aims to find a solution that helps to improve the production rates in Fula Field ...
  • Adam, AbdAlgani Ibrahim Saeed; Satti, Mohammed Abdalhai Alhassan; Albasheer, Mohammed Afeefeldeen Suleiman; Haron, Mohammed Ahmed Adam; Ibrahim, Qussai Saeed Abdulghafoor; Supervisor, - Mohanned Mahjob Khairy (Sudan University of Science & Technology, 2020-11-01)
    Most of the Sudanese fields face the challenges of maintaining production rates, which are decreasing at a large rate annually. This project aims to find a solution that helps to improve the production rates in Hamra Field ...
  • Ali, Ahmed Mohamed; Mustafa, Abdelrahman; Abdalla, Hassan modaser; Mohammed, Mohammed Alsir (Sudan University of Science & Technology, 2016-10-01)
    This work aimed to accurately identify and solve production issues in Sudanese field using pipeline network modeling. Pipeline network plays important role in delivering the production from wellhead to Field Processing ...
  • Abdulgani, Abubkr Eltayeb; Ahmed, Akram Omer; Mahmoud, Mahmoud Abu Elgasim; Geeb Allah, Samah Hassan; Supervisor, - Fatima Ahmed Albrair (Sudan University of Science & Technology, 2020-11-01)
    During the reservoir production life reservoir pressure will decline. Also after water breakthrough the fluid column weight will increase as hydrostatic pressure will increase because of increased water and oil mixture ...
  • Omer, Ayman Mjdoub Mhjoub; Elamin, Mohamed Elamin Ahmed; Fadl alla, - Mohanned Abdalgadir Mohamed; Alhassan, - Omer Elamin Mohamed; Supervisor - Mohamed Ahmed Mohamed Naeem (Sudan University of Science and Technology, 2014-09-01)
    The well casing conceder one of the most important process during drilling and production so that must be designed carefully; there are many problems face the casing, one of this problems is leakage pressure such as that ...
  • mohammed, Ahmed Abdelrahman; mohammed, Mohamed Albager; Ahmed, Musab Mukhtar (Sudan University of Science & Technology, 2016-10-01)
    The major source of producing LPG in Sudan is from oil refining. The objective of this work is to Recover natural gas liquids and produce LPG from associated gas produced . The unit will consist of two parts: refrigeration ...

Share

Search SUST


Browse

My Account