SUST Repository

Browsing Bachelor of Petroleum Engineering & Technology by Title

Browsing Bachelor of Petroleum Engineering & Technology by Title

Sort by: Order: Results:

  • Gumaa, Abuhorira El Tahir; El-Hassan, Hassan Fath-Elrahman; El hassan, Rammah El asaad; El hadi, Mishaal Mairgani; Hamad, Hosam Alden Ahmed (Sudan University of Science & Technology, 2016-10-01)
    Pipe Sticking is one of the serious problems that the drillers experience during drilling process of oil and gas wells. Pipe sticking can be divided into two categories: the differential stuck and mechanical stuck (shale ...
  • Ahmed, Malik Alzain; Mohammed, Mohamed Taj Elsir; Alkenani, Mohamed basher; Osman, Musab Abdalla (sudan university of science & technology, 2018-10-01)
    Pipe Sticking is one of the serious problems that the drillers experience during drilling process of oil and gas wells. Pipe Sticking can be divided into two categories: The Differential Stuck and Mechanical Stuck (Shale ...
  • Hamad, Abd alla Moutasim Osman; Ataelmanan, Ahmed Omar Badour; Adam, Ez aldeen Beshara Basher; Ali, Mustafa Elhassan Jepril; Supervisor - Ahmed Abd elaziz Ibrahim (Sudan University of Science and Technology, 2014-09-01)
    In this research mesquite wood powder has been used as an additive to cement to reduce cement micro-cracks, it has been added to five cement samples with different percentage, after the required tests ,it has been founded ...
  • Alshaikh, Abazar Ahmed; Adam, Ahmed Dafaallah Ahmed; Saeed, Hassan Abdaldaim Hussain; Mohammed, Saddam Alrashied (sudan university of science & technology, 2018-10-01)
    Wax deposition in wellbore tubing at shut-in status is one of the major problems in ALRAWAT oil field. The main purpose of this research is to find suitable solution for wax deposition in tubing as one of the major problems ...
  • Hussain, Abufiras Kamal Abdullah; ahmed, Mohammed Mustafa Altayib Mohammed; Elhassan, Mohammed Hashim Mohammed; Alblula, Mutaz Salah Ibrahim; Supervisor - Abdullah Abduljabbar; Supervisor - Abdullah Abduljabbar (Sudan University of Science and Technology, 2015-10-04)
    In spite of continued improvements in logging technology, mud-filtrate invasion and related formation damage due to drilling fluids can result in misinterpreted values of rock and fluid properties in the reservoir. Well ...
  • Abdalla, Alfadel Ali Saeed; Elnour, Hamza Mohammed; Sayed, Kamal El-din Fayez (Sudan University of Science & Technology, 2016-09-01)
    In the present research, Material and Energy balance, and modeling for the fluid catalytic cracking was developed to obtain conversion 92% by using Runge-kutta order implemented in MATLAB with suitable zeolite weight. And ...
  • Al-haj, Al-basheir Khidir Basheir; Al-Daow, Al-Daow Mohammed; Abdulrahman, Omer Ahmednour; Mubarak, Mohanad Mubarak Yosuf; Supervisor - Mohamed Ahmed Mohamed Naiem; Supervisor - Mohamed Ahmed Mohamed Naiem (Sudan University of Science and Technology, 2015-10-04)
    The interest in torque and drag (T&D) issues has over the last years increased when the complexity of wells drilled become higher.Excessive drillstring T&D is one of the major limitations of extended reach drilling. The ...
  • Elnour, Kamal Elnour Kamal; Elhassan, Mohamed Abd Elhamid Mohamed; Ahmed, Mohamed Mamoun (Sudan University of Science & Technology, 2016-10-01)
    The pressure drop calculations in any producing system is depends mainly on the multi-phase correlations which is a function of fluid properties and pipe conditions. Many correlations were available for the calculations ...
  • Muhammed, El-Seddeg Nour El-Den; Mursi, Muhammed Hamdi; Elsadeq, Mohamed Zaroog; Abdullah, Wafaa Muhammed; Supervisor, -Elham Mohammed Mohammed Khair (Sudan University of Science and Technology, 2017-10-10)
    Sand production is a growing concern in petroleum industry due to its severe problems and the associated technical and operational challenges. In Sudan, due to the relatively high viscose fluids, and the poor consolidated ...
  • Mustafa, Hussam aldeen Mustafa Mohammed; Elgasim, Mohammed Abdelrahman Manofali; Idrees, Muhanad Abdu Khidir (Sudan University of Science & Technology, 2016-10-01)
    Knowledge of bubble point pressure is one of the important factors in the primary developments of an oilfield. Bubble point pressure is required for analysis of wells performance, reservoir simulation, and production ...
  • Mohammed, Ayman Merghane Ahmed; Mahgoub, Gihad Abdul-basiet; Allah, Rashid Abdul-Mahmoud Nour; Mohammed, Mohanad Omer Eshag; Supervisor, -YahyaSharfi (Sudan University of Science and Technology, 2017-10-04)
    Oil viscosity is veryimportant property in oil industry, it’s very important in the designing of production equipment, testing wells, EOR methods selection and pipelines. And for that a new correlation has been developed ...
  • Mohamed, El-Mustafa Mohamed Hamad; Ahmad, Mohammed Ahmad Hassan Mohammed; Taha, Asia Osman Ali; Al-Hassan, Mohamed Mahdi Al-Abd; Supervisor, -Satti Merghani (Sudan University of Science and Technology, 2017-10-07)
    One of the most important problem in petroleum industry is to know the pressure distribution in the reservoir with realistic and applicable method, this study gives a pressure description with respect to time and distance. A ...
  • Aldood, Saeed Ahmed Hamid; Dut, Achai Ring Majok; Ali, Ahmed Yousef Ahmed; Abdelnabi, Mohammed Musa Ali (sudan university of science & technology, 2018-10-01)
    While searching to optimize the production rate dealing with a treatment of heavy oil crude in FNE, Fula North East “FNE” is a perfect nominee to this thermal recovery according to its high density “0.95” and high viscosity ...
  • Adress, Alsadig Mohammed Osman Altom; Salih, Hana Salih Mohammed; Babiker, Ibrahim Hashim Ibrahim; Hamad, Rofida Alhadi Mohammed; Supervisor, - Ahmed Abdelaziz Ibrahim (Sudan University of Science & Technology, 2020-11-01)
    Generally, Formation Damage can be defined as any reduction in near well bore permeability which is the result of any material from drilling, completion, production, injection, attempted stimulation or any other well inter. ...
  • Mohammed, BabikerAbdelgadir; NourEldaim, Mohammed Abdelbagi; Husain, Mohammed Ismaeel Osman; Ahmed, Mojahid Mohammed Gasmallah; Supervisor - Mohammed Ahmed Mohammed Naiem (Sudan University of Science and Technology, 2014-09-01)
    Drilling operation is very important in oil and gas industry, so we must choose an optimum bit with high performance and low cost. There are many methods used for evaluating bit performance such as: Cost per foot (CPF), ...
  • Mohamed, Abas Yuosif Ahmed; Mohammed, Alaaedien Osman Ahmed; ahmed, Khalid Hussein Osman; Mohamed, Sami Abd alwahab Alsafi; Paboum, Ruay Kai Ter; Supervisor, - Mohanned Mahgoub Khairy (Sudan University of Science & Technology, 2020-11-01)
    Hydraulic jet pumpit’sone of the artificial lift method. The conept of this pump depends on creating a pressur difference at the bottom hole by pumping the power fluid with a larg pressure and flow rate, and the pressure ...
  • Eltygani, Mohamed Gaafar; Mohamed, Mogahid Elmahi; Albalolh, MunibAbd Alrahim; Awadalkarim, Sultan Ahmed (sudan university of science & technology, 2018-10-01)
    Managing sand production is critical in Fulafield operation. Solid productionis often causing issues with completion and surface facilities. Sand management and prevention are the current practices and leaving sand control ...
  • Dafa Alla, Adam Mohammed Ahmed; Mohamed, Babiker Alhassan Mohammed Ali; Eid, Buraei Mohammed Al Helo; Mohammed, Mazin Abdalhameed Ismael; Supervisor, - T. Amro Yusuf (Sudan University of Science & Technology, 2020-10-01)
    Water saturation estimation by interpretation of Archie’s model in clean formations has successfully been used over the years. However, due to shale or clay effects in shaly sand formation this model results in inaccurate ...
  • Ahmed, Ahmed Abd AlRahman; Saeed, Ahmed Adam Mohamed; Edrees, Alsamaual Abdu; Ahmed, Magdi Ahmed Adam; Supervisor, - Hamid Suliman (Sudan University of Science & Technology, 2020-10-01)
    Pipelines are widely used for the transportation of hydrocarbon fluids over millions of miles all over the world. The structures of the pipelines are designed to withstand several environmental loading conditions to ...
  • Abdulrahman, Mohammed Alnoor Aldegail; Adam, Sufian Hassan Mohammed; AbdelRahman, Reda Ismail Adam; Alojaiba, Eltayeb Omer; Supervisor - Abbas Musa Yagoup (Sudan University of Science and Technology, 2015-10-10)
    The study has been made in the Red Sea area block15 to predict pore pressure of the formation using Eaton method which considered being one of the indirect methods of calculation and estimation of pressure. This method ...

Share

Search SUST


Browse

My Account