SUST Repository

Browsing Masters Dissertations : Engineering by Title

Browsing Masters Dissertations : Engineering by Title

Sort by: Order: Results:

  • Abdelgadir, Eiman Mohamed; Supervisor -, Fragoon Mohamed Ahmed (Sudan University of Science and Technology, 2015-11-10)
    An Immunochromatography (ICT) bio-detector facilitates low-cost, rapid identification of various analytes at the point of care. The ICT cell consists of a porous membrane containing immobilized ligands at various locations. ...
  • Alnour, Mohyedin Ahmed Abdelghadir Mohammed; Supervisor - abdulh ussain (Sudan University of Science and Technology, 2005-08-10)
    Experimental investigation was made to determine pressure loss coefficient of different types of burners used in industrial combustion applications. Tests were carried ...
  • A.Alhafeez, Suhair Siddig; Supervisor, - Alia Osman Mohammed (Sudan University of Science & Technology, 2018-12-01)
    The construction industry in Sudan has witnessed rapid growth in recent years, the emergence of mega projects and strategic projects and the entry of foreign companies of large names. This has led to the growth of the entry ...
  • Salih, Osman Omer Osman (Sudan University of Science & Technology, 2016-12-01)
    The construction industry is considered one of the most hazardous industries, not only in developing countries but also throughout the world due to its unique nature. This makes more attention to construction safety ...
  • Farah, Reem Al-Hafiz Abd-AlKhaliq (Sudan University of Science & Technology, 2015-09-10)
    The key factors associated with contraction industry development worldwide are identified by using a grounded theory approach. This first involved the identification of 62 variables from earlier studies. A questionnaire ...
  • Rida, Mutaz Zaher Mebrahto; Supervisor - Awad Saad Hassan (Sudan University of Science and Technology, 2015-03-01)
    Construction industry has complexity in its nature because it contains large number of parties as clients, contractors, consultants, stakeholders and others. Construction projects suffer from many problems and complex ...
  • Abdorahman, Mona Fadul Mustafa; Supervisor, - Mona Adam Gumma (Sudan University of Science and Technology, 2020-01-01)
    The three measures of efficiency of a project are time, quality, and cost. The overall goal for project is to implement the project in the shortest time, the lowest cost and the highest quality. Infrastructure projects as ...
  • Mohamed, Abu-Bakr Ahmed; Supervisor ,- Ahmed ELameen Haroun (Sudan University of Science and Technology, 2011-04-01)
    Construction projects more often face some discrepancies/failures (in almost all aspects) by the end of their stated completion times. However, these discrepancies are generally deviations from the contract or/and the ...
  • Abd Elltif, Ibrahim Mohamed Hafiz; Supervisor - Ahmed Abd-Alla Mohamed Imam (SUDAN UNVERSITY OF SCIENCE AND TECHNOLOGY, 2007-04-01)
    Early failure detection and identification of incipient faults is desirable for online condition assessment, product quality, assurance, and improved operational efficiency of internal combustion engine. The basis of ...
  • Adam, Ahmed Hamed Ahmed; Supervisor - Fath Elrahman Ismael Khalifa (Sudan University of Science and Technology, 2015-09-13)
    A fault is an unexpected change of the system functionality ,which causes deviation of a plant behavior from that which is specified it . The problem of detect the location of fault in transmission line has become complex ...
  • Elmubark, Omer Abd Elaziz Abd Elrahim (Sudan University of Science and Technology, 2011-03-01)
    Transmission lines, among other electrical power system components, suffer from unexpected failures due to various random causes. These failures interrupt the reliability of the operation of the power system. When unpredicted ...
  • Modawy, Duaa Elgassim Abbas; Supervisor, -Mohammed Osman Hassan (Sudan University of Science and Technology, 2018-02-26)
    The analysis of power systems under fault condition represents one of the most important and complex task in Power Engineering. The studies and detection of these faults is necessary to ensure that the reliability and ...
  • Hussein, Ehab Ebrahim Ahmed; Supervisor,- Ali Mohammed Hamdan Adam (Sudan University of Science & Technology, 2016-03-01)
    This research aims to analyze and address the technical study fault tolerance in controlling the fuel map by predicting the expected failures to occur in the actuators unit the internal system........
  • Mohammed, Khidir Idris Ali; Supervisor - Mohammed Musaddag El-Awad (Sudan University of Science and Technology, 2010-03-01)
    The increasing demand for energy now a day makes the need for saving energy one of the top priorities in industry. The district cooling system is a good concept competitive in increasing energy efficiency, reducing ...
  • Bashir, Ali Bashir Elzaki; Supervisor,- Ali Mohamed Hamdan Adam (Sudan University of Science and Technology, 2015-12-10)
    The pressure effect on performance of airlift pump (ALP) was examined experimentally, to use in turbine pit of Rosaries power station. An airlift pump is a device that pumps a liquid or slurry using only gas injection. In ...
  • Almakki, Mudthir Bakri Hassan; Supervisor - Abdalla M. T. Shigidi (Sudan University of Science and Technology, 2007-11-01)
    A methodology was developed to perform economic and financial feasibility for a precast concrete factory which is expected to produce beams, slabs, columns and stairs. The aim was to find a low cost alternative to ...
  • A.AlRasoul, Adil Alhadi; Supervisor - Fakhreldein Mohammed (Sudan University of Science &Technology, 2008-01-01)
    Today, the ability to transmit huge amounts of information along slender strands of high-purity glass optical fiber with the speed of light has revolutionized communications. The large signal-carrying capacity of optical ...
  • Alimam, Fateh El Rahman Ali Mohamed; Supervisor - Ashraf Gasim El Sid Abdalla (Sudan University of Science and Technology, 2015-05-01)
    The main objectives of this study is to maintain a proper Flexible Network to control and manage data transmission Over Access Network, with integrated effort of Associated section to make easy and fast implementation ...
  • Elobied, Hisham Ahmed; Supervisor - Galal Abdalla Ali (Sudan University of Science and Technology, 2014-01-20)
    The primary purpose of this study is to identify the causes of rutting in highway pavements in the form of channelization particularly on wheel tracks resulting from high traffic repetitions and environmental effects. ...
  • Karrar, Emad Kheder Ahmed; Supervisor - Martino Ojwok Ajang (Sudan university of Science and Technology, 2010-03-01)
    In this research, model of a three phase induction motor has been derived using mathematical modeling principles. The model has been implemented using MATLAB Simulink software. Based on indirect field oriented control ...

Share

Search SUST


Browse

My Account