SUST Repository

Browsing Masters Dissertations : Engineering by Title

Browsing Masters Dissertations : Engineering by Title

Sort by: Order: Results:

  • AHAMED, OSMAN AHAMED MOHAMMED; Supervisor - ALKHAWAD ALI ELFAKI (SUDAN UNVERSITY OF SCIENCE AND TECHNOLOGY, 2010-01-01)
    This research presented a new method for the mass production of a high quality, low cost, sheet metal products using a die, press and transferring mechanism. The research presented a definition of the tool (die), its ...
  • Ibrahim, Sana'a Elsadig Abdullah; Supervisor - Alawad Fathelrahman Elfak (Sudan university of Science and Technology, 2009-08-01)
    This research aims to use the AutoCAD program in clothes pattern drafting in order to develop a simple , accurate method of pattern drafting and also available for every pattern maker due to the simplicity of interfacing ...
  • ABD ELRAHMAN, SAMI SALAH; Supervisor - Abdelfattah Bilal (Sudan University of Science & Technology, 2005-01-01)
    Design of machine elements is a critical job, because these elements must be designed without any error according to their use. Also the design procedures differ from element to an other and they may need some iteration ...
  • TAHA, BADY IBRAHIM ALI; Supervisor, - ALKHAWAD ALI ELFAKI (Sudan University of Science and Technology, 2017-07-10)
    This research presented a new method for the mass production of a high quality, low cost, sheet metal products using a die, press and transferring mechanism. The research presented a definition of the tool (die), its design ...
  • Eltayib, Ream Elballa Elnaiem (Sudan University of Science & Technology, 2016-10-01)
    This study is calculation of cooling load for central air condition unit using computer program (Hourly Analysis Program), the case which studied was building of faculty of engineering in Elimam Elmahadi University. According ...
  • Hassan, Mohammed Musa Abd Algader; Supervisor - Ali Mohammed Ali Seory (Sudan University of Science and Technology, 2010-12-01)
    This research explain analytical study for all variables which effective hydrodynamic bearing design like pressure, load, fraction force and oil film Thickness. The objectives of this research are to calculate the ...
  • Abdalla, Ayoub Osman Gamareldin (Sudan University of Science and Technology, 2010-04-01)
    During the last years, gas turbines have been widely used to produce electricity power. Gas turbine power plants mainly met the increase on load at peaking load. However, gas turbine power plants have the disadvantages ...
  • Ali, Razan Mohammed Abbas Mohammed; Supervisor, Alaa Edeen Abdullah Awouda (Sudan University of Science and Technology, 2017-04-10)
    The main objective of this project is to develop a system in which it counteracts a situation where the driver is travelling too close to another vehicle or fixed object in front. However this project to develop a system ...
  • Mohamed, Tamador ElkhansaJaber; Supervisor - Megdi B. M. Amien (Sudan University of Science and Technology, 2014-02-10)
    Heart diseases (HD) are the number one cause of death globally, more people die annually from HDs than from any other cause, according to World-Health-Organization (WHO) 7.3 million were died due to coronary heart disease ...
  • Bilal, Hassan Abdalla; Supervisor ,- Ahmed Hassan Ahmed (Sudan University of Science & Technology, 2012-07-01)
    Rapid wear of drilling bits in oil exploration companies occur due to friction with the sand in mud layers, this wear causes the drilling bits to consume in large quantities and leads to frequent breakdowns of drilling ...
  • Abubaker, Abdalla Mohamed Alnoor; Supervisor, - Khalid Hamid Bilal (Sudan University of Science and Technology, 2016-05-10)
    In industries like oil and gas, Telecommunication Networks used multiple communication technologies to eliminate any possibilities of failures, when the network is operational, in case of catastrophic situation these ...
  • Saad, Omer Yahia Mansour; Supervisor - Amir Ahmed Dawood (Sudan University of Science and Technology, 2007-06-01)
    Cathodic protection has probably become the most widely used method for preventing the corrosion deterioration of metallic structures in contact with any forms of electrolytically conducting surface. The most rapid development ...
  • Elshich, Al Hadi Emam Abdalla; Supervisor, - Mohyedin Ahmed Abdelghadir (Sudan University of Science and Technology, 2018-08-10)
    Cavitation in a centrifugal pump has a significant effect on pump performance. Cavitation degrades the performance of a pump, resulting in a fluctuating flow rate and discharge pressure, that reduces pumps efficiency and ...
  • Elamir, Iman Abdel Rahim Eissa; Supervisor - Elias Sidieg Mohammed Hassan (Sudan University of Science and Technology, 2015-05-01)
    The main purpose of the research is to design a Common Central biomedical waste treatment facility CBWTF and number of waste assembly points distributed in different geographical locations within state of Khartoum, and ...
  • MOHAMMED, ESRAA ALWASILA HAMID; Supervisor, - SALAH ALDEEN AGABAN (Sudan University of Science and Technology, 2017-11-10)
    This research addressed the challenges confronting construction contract administration in Sudan, the purpose of the research is to enhance the concept of construction contract administration, its importance and the role ...
  • Taha, Mohammed Abdou Imam; Supervisor - MudathirSulieman Mohamed Ali (Sudan University of Science and Technology, 2015-09-10)
    The Study talks about the challenges of implementing telecommunications projectsin Sudan through four chapters: project selection, selection of the team, the organization and the impact and influence of external factors. ...
  • Badr Eldien, Aziz; Supervisor ,- Eisa Bashier Mohammed (Sudan University of Science and Technology, 2011-03-01)
    This project study’s the logo language as used in the international factory for iron and steel (IFS) to change the factory from classically controlled into programmable logic controlled. The logo language depends on ...
  • Ibrahim, Mussaab Ibrahim Mohammed; Supervisor - Elsadig Saeid Gebreel Hamed (Sudan University of Science and Technology, 2015-06-01)
    Path loss prediction is used in many wireless communication systems in order to know the signal level at the receiver and to enables the designer to know the environment characteristics. One of the important issues of ...
  • ELSEDIG, SUHAIR ABDAL SADIG; Supervisor - SAMI ABDALLA OSMAN (Sudan University of Science and Technology, 2010-10-01)
    The importance of Sub-grade soil strength to road pavement plays a great role in design optimization of overlying structural layers. Sub-grade soil strength is major factor in the design, construction and performance of ...
  • Ezzeldien, Lodan Salah; Supervisor, -Galal A. Ali Mohamed (Sudan University of Science and Technology, 2020-09-22)
    These thesis studies highway pavement materials, types, flexible and rigid, characteristics and all tests related CBR, resilient modulus, modulus of sub grade reaction (k), design parameters, and correlation. The thesis ...

Share

Search SUST


Browse

My Account