SUST Repository

Browsing Masters Dissertations : Engineering by Title

Browsing Masters Dissertations : Engineering by Title

Sort by: Order: Results:

  • Mohammed, Yousra Yousif Abbas; Supervisor,- Zeinab Adam Mustafa (Sudan University of Science & Technology, 2016-02-06)
    Medical images are generally noisy due to the physical mechanisms of the acquisition process. In Computed tomography (CT) scan there is a scope to adapt patient image quality and dose. Reduction in radiation dose (i.e. the ...
  • Mostafa, Siham Moubarak Elbasheer (Sudan University of Science & Technology, 2016-11-01)
    Piles offer an innovative alternative for foundations in expansive soils.......
  • Elhassan, Ahmed Karar Mohammed; Supervisor ,- Fath Alrhaman Mohamed Adam (Sudan University of Science and Technology, 2011-09-01)
    In this study the Finite Element formulation for space trusses was modeled in MATLAB Program Language. The modeled Program named Analysis of Space Truss by using MATLAB Program language (ASTMP). Numerical examples were ...
  • ahmad, Tayseer ibraheem Othman; Supervisor, - Ebtihaj Abu Elgasim Mohamed Ahmed (Sudan University of Science & Technology, 2020-02-01)
    A cantilever beam is an important structural element that provide less support and efficient use of space in building design . the cantilever beam is rigidly fixed in one end and the other end is hanged in the air . It is ...
  • Hasb ALLA, Tayseer Ismail; Supervisor, - Abdelrahman Elzubeir Mohamed (Sudan University of Science and Technology, 2018-07-10)
    The research reviewed the structural systems used for buildings with long spans. The use of the grid slabs for long spans was studied using the finite element method. The primary objective was to carry out a parametric ...
  • A. Bendaw, EyhabFathi; Supervisor - Ali Mohammed Hamdan Adam (Sudan University of Science and Technology, 2014-05-20)
    A finite-time thermodynamic modeling and simulation of irreversible Diesel cycle engines has been developed taking into account the variabilityof specific heats for working fluid due to temperature variation. The effect ...
  • Hussein, Rami Mohamed Ali; Supervisor, - Ali Mohammed Hamdan Adam (SUDAN UNVERSITY OF SCIENCE & TECHNOLOGY, 2015-12-03)
    A finite-time thermodynamic modelling and simulation of irreversible Joule-Braytoncycle has been developed taking into account the variabilityof specific heats for working fluid due to temperature variation. The effect ...
  • Musa, Musab Alamir; Supervisor,- Isam Abbakar Ishag (Sudan University of Science and Technology, 2016-11-10)
    The sector of construction industry is one of the important industries that contribute in developing and growth of the economy. Recently the sector of construction industry have seen a remarkable development and this has ...
  • Mohammed, Rashad Abdullah Ahmed; Supervisor ,- Alnazier Osman Mohamed Hamza (Sudan University of Science and Technology, 2012-01-01)
    Many critical patient-care decisions are based on results supplied by the clinical laboratory produced by means of the clinical laboratory instruments like flame photometer which is used to determine the proportion of ...
  • Saed, AmmarBrairMohammed; Supervisor,- AbdelRahimElhagAbdelaziz (Sudan University of Science and Technology, 2016-03-10)
    Flood is one of the most destruction natural hazards which lead to the loss of lives, properties and resources. It has therefore become important to create easily read, rapidly accessible flood hazard map, which will ...
  • EBRAHEEM, ALAMEEN KAMAL ABDALHY; Supervisor,- Awadalla Taifour Ali (Sudan University of Science and Technology, 2012-03-01)
    This study investigates the control of liquid level of flow control system Proportional-integral-derivative controllers were used in this study as a control strategy. Optimum control setting has been determined ...
  • Husien, Murtada Mohamed Abdelwahab Mohamed; Supervisor - Abd Alrasoul Gabbber Azubaidi (Sudan University of Science and Technology, 2009-01-01)
    The thesis ( free space optical communication system ) describes two methods for optical wireless system ( indoor and outdoor system),Also this thesis make a combination to a different types of all possible topologies that ...
  • BASHEIR, TARIG MUBARK SAEED; Supervisor ,- GIDDANI OSMAN ADDALAN KALCON (Sudan University of Science & Technology, 2012-09)
    This project investigates the frequency stabilization of highly-distributed future AC networks with high penetration of wind generation and energy storage systems. The investigation focuses on frequency stabilization ...
  • Saeed, Omaya Mohamed Nour Mohamed; Supervisor - Saad Daoud Sulaiman (Sudan University of Science &Technology, 2009-08-01)
    ABSTRACT The Atmel AVR microcontrollers are excellent for signal processing applications due to their powerful architecture, strong instruction set and built-in multi-channel 10-bit Analog to Digital Converter (ADC). ...
  • Kenyi, Peter Abdalla Lawya; Supervisor - Amir Ahmed Dawood (SUDAN UNVERSITY OF SCIENCE AND TECHNOLOGY, 2007-09-01)
    This Thesis sets out the control principle, which governs the design of automatic control for Khartoum North Power Station, Fuel Oil Forwarding Pumps. It also provides an outline design for such control systems. The ...
  • khalf Alla, Hajir Osman Saeed (Sudan University of Science and Technology, 2017-04-10)
    The center-pivot irrigation system has become one of the most commonly used due to its efficiency worldwide but it suffers from the shortcoming of the pumps needing frequent maintenance and monitoring; which are prone to ...
  • Eltati, Mohamed Elzuber Ahmed (Sudan University of Science and Technology, 2006-11-01)
    One of power plant requirement is the availability and cost of fuel to be used. Sudanese heavy fuel oil (furnace) satisfies these requirements. There are problems in handling and using furnace fuel oil directly in combustion. ...
  • Ali, Fawaz Elsiddig Ahmed; Supervisor, - Awadalla Tayfour Ali Ismail (Sudan University of Science and Technology, 2017-04-10)
    The development of performance longitudinal autopilot is very important to maintain aircraft in the longitudinal stability mode during flight operation. The longitudinal control consists of four control loops which pitch ...
  • Ahmed, Omer Mahgoub; Supervisor,- Awadalla Taifour Ali (SUDAN UNVERSITY OF SCIENCE AND TECHNOLOGY, 2010-08-01)
    Use of variable speed control to improve Induction Motor performance and efficiency has become the core of recent developments in the industry. Among conventional control methods the proportional integral controlling ...
  • Osman, Mohammed Ali Mohammed; Supervisor - IMAN ABU-AL MAALY (Sudan University of Science & Technology, 2005-01-01)
    The control of the environment often takes place only by means of temperature control, but when the control is on the environment in case of factories (in textile factories the control must be in the temperature as well ...

Share

Search SUST


Browse

My Account